Description
The TORISHIMA CDM is a horizontal axially split double-suction pump used in a wide range of applications
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.
CDMV is a vertical type of the CDM, installeable at limited space.
Technical Data
| Total Head | 3 to 400 m / 10 to 1,300 ft |
|---|---|
| Capacity | 9 to 36,000 m³/h / 40 to 158,500 USgpm |
| Temperature | up to 80°C / 176°F |
| Size | 200 to 2,000 mm |
Both casing and bearings can be divided into
upper and lower portions to allow easier disassembly for inspection. Pumps with large diameters up to 2000mm are also standardized. This pump with its rugged construction and high efficiency, is most suitable to feed various liquids at municipal water works plants, steel plants, etc. Vertical execution is also available. | ||||||||
General specifications ranges
|
| Model | : | CDM, CDMV (Vertical type) | ||
| Capacity (Max.) | : | 33,000 M3/hr. | ||
| Head (Max.) | : | 220 M. | ||
| Temperature | : | 105 °C | ||
 | in/out diameter | : | 200 - 1,800 mm. | |
Material Casing
| : Cast iron, Ductile cast iron, Stainless steel, Duplex SS. | |||
Impeller
| : Cast iron, Bronze, Stainless steel, Duplex SS. | |||
Shaft+Sleeve
| : Bronze, Stainless steel, Duplex SS. | |||
| remarks | : Suitable for pumping large quantities of water such as large urban plumbing systems. Irrigation for agriculture, etc. Pump seals are available in both Packed gland seal and Mechanical seal for limited space. Can use vertical pumps to Save space | |||
| Model | CDM |
| Application | High capacity for general industries circulation, Fire-fighting |
| Head (Max.) | 300 m |
| Temp (Max.) | Up to 80°C |
| Capacity (Max.) | 33,000 m³/hr |
| Discharge size | 200 - 1,400 mm |
| Material Casing | Cast iron,304 Stainless steel,316 Stainless steel |
| Impeller | Cast iron,Bronze,304 Stainless steel,316 Stainless steel |
| Shaft | Stainless steel, Duplex Stainless steel |
>>DOWNLOAD KATALOG TORISHIMA CDM<<
| Model | CDMV |
| Application | High capacity for general industries circulation, Fire-fighting |
| Head (Max.) | 300 m |
| Temp (Max.) | Up to 80°C |
| Capacity (Max.) | 33,000 m³/hr |
| Discharge size | 200 - 1,400 mm |
| Material Casing | Cast iron,304 Stainless steel,316 Stainless steel |
| Impeller | Cast iron,Bronze,304 Stainless steel,316 Stainless steel |
| Shaft | Stainless steel, Duplex Stainless steel |
Applications
Energy Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting
General Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting, Sea water desalination
Building : Water Supply, Drainage, District Heating and Cooling
Water Works : Water Intake, Distribution, Water Supply
Agriculture : Irrigation, Drainage
Others Pipe line Boosting, etc.
Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)
