4BHS / Pompa Sumur
4” Borehole Pump for Well
Features
4” Submersed Centrifugal electric pumps for deep well in AISI 304 stainless steel
Reliable and strong
Corrosion-proof
Exceptional efficiency due to the smooth surfaces of the impellers and nozz
Stainless Steel 4” Borehole Pump
Features :
Pumps :
Highly efficient with the use of smooth stainless steel. Less power required.
Compact and lightweight due to the use of a sectional type casing.
Easy maintenance and inspections due to a simple structure.
Good resistance to sand and grit due to a small number of sliding parts.
Motor :
Using advanced design and manufacturing technologies, this canned type motor assures reliable, durable and efficient operation.
Designed to operate with significant fluctuations to power supply voltage as often encountered in rural areas.
Applications :
Clean water extractions from bore holes
Pressure boosting for domestic
Farming
Industrial applications
Technical Pump Data:
Maximum immersion:
– 350 m (with motor in water bath)
– 150 m (with motor in bath of liquid refrigerant),
Maximum temperature of the liquid:30°C
Maximum presence of sand: 50 ppm
Maximum presence of Chlorine: 500ppm
Discharge connection :
– G1frac14; (4BHS 2), G1½ (4BHS 4), G2 (4BHS 7-4BHS 15)
The pumps can be supplied as follows:
– 4BHS pump plus OY motor in bath of liquid refrigerant
– 4BHS pump plus WY motor in waterbath
The pump and the motor are supplied separately.
Technical Motor Data:
2 poles motor in bath of liquid refrigerant (OY), or in water bath (WY)
Max start-ups per hour: : 30 (OY) – 20 (WY)
Quick coupling for power supply cable
Insulation class F (OY) – B (WY)
Protection degree IP58 (OY) – IP68 (WY)
Single-phase voltage 230V (±10%) 50Hz (OYM),
three-phase voltage 380-415V (±10%) 50Hz (OY)
Single-phase voltage 230V (-10%+6%) 50Hz (WYM),
three-phase voltage 380-415V (-10%+6%) 50Hz (WY)
For cables dimensioning please see our Data Book
Material:
Motor discharge and motor bracket in moulded stainless steel
Bracket, inlets, joint, impeller, diffuser, valve, stages, tie-rod and isolating cover in EN 1.4301 (AISI 304)
Wear rings in EPDM/ EN 1.4301 (AISI 304)
Shaft in EN 1.4401 (AISI 316)
Radial bearings, axial bearings and friction ring in tungsten carbide
>>>DOWNLOAD KATALOG EBARA 4BHS<<<
>>>DOWNLOAD KATALOG EBARA 4BHS<<<
Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)
