Torishima CFHV Vertical Centrifugal Volute Pump

Description

The Torishima CFHV is a vertical centrifugal volute pump,
mainly used as a booster pump in RO Desalination plant with Pressure Exchanger System.
The pump is such designed that it can take a high suction pressure coming from pressure exchanger in terms of pressure component and seal design. The thrust bearing is also designed to take a high axial thrust load due to high suction pressure.
The material of major components such as impeller, casing and shaft are made of Duplex or Super Duplex for seawater application.
The vertical mounting arrangement, which motor is mounted directly on the pump casing, gives advantage of saving an installation space in the plant compared to horizontal mounting.

Technical Data

Total Head	up to 125m / 410ft
Capacity	up to 1,940m³/h / 8,530USgpm
Discharged Pressure	up to 10.78MPa / 1,563psi
Size	40 to 500mm

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

HLV/HLAV Glandless(sealless)pump motor unit Boiler circulating pump HLV

Description
The TORISHIMA HAV/HLAV is a glandless (sealless) pump motor unit for boiler circulating pump application with pump
and motor being integrated in a pressure-tight casing.
The glandless design (no shaft seal) makes this pump best suited for pumping of high temperature and
high pressure liquids without any leakage at all.
The pump is driven by Torishima made high performance three phase induction motor filled with water (wet motor).

Technical Data
Total Head up to 320m / 1,050ft
Capacity up to 6,840m³/h / 30,000USgpm
Temperature up to 420°C / 788°F
Pressure up to 33MPa / 4,780psi
Motor Rating up to 1,500kW
Voltage 400V to 11kV

HLV pumps and their driving motors from a  totally enclosed integral unit.  Water-filled three-phase motors (wet motors)  are used as drivers. These pumps are suitable  for high pressure, high temperature  application without any leakage due to no  shaft sealing part.

General specifications ranges  Total head up to 320m (1,115ft) Capacity up to 6,000m 3 /hr (26,420U.S.gpm) Temperature  up to 420deg.C (788deg.F) Size DN40 to 200mm (DN1 to 8in)

>>>>DOWNLOAD KATALOG HLV / HLAV<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

CDKTV Vertical double-suction pump with canister

Description

The TORISHIMA CDKTV is a vertical double-suction pump with canister. It is mainly applied for brine recirculation pumps in seawater desalination plants and hot well pumps in geothermal power plants.

The hydraulic design of the double-suction impeller is optimized to obtain high efficiency whilst keeping the volute casing size and canister inside diameter minimum. Also lower NPSH3 allows higher operating speed compared to conventional single-suction vertical pumps.

This optimized design provides minimized power consumption, plus smaller canister in length and diameter which contribute to reduce the cost of excavation / installation.
Multistage design for higher head is available on cutomers requirement.

Technical Data

Total Head up to 100m / 330ft
Capacity up to 20,000m³/h / 220,000USgpm
Temperature up to 100°C / 212°F
Size 500 to 1,500mm

>>>>>>>DOWNLOAD KATALOG TORISHIMA CDKTV<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

PERBANDINGAN ISV SPV MMTV VERTICAL PUMP TORISHIMA

                               Model                       ISV                     SPV             MMTV

		Axial Flow	Mixed Flow	Multi-stages with Barrel
	Cylinder volume (Max.)	186,000 M3/hr.	68,000 M3/hr.	4,000 M3/hr.
	High transmission (Max.)	8 M.	150 M.	780 M.
	temperature	40 °C	40 °C	200 °C
	In-out pipe size	: 400 - 4,600 mm.	300 - 2,800mm.	40 - 500 mm.
	material	: Cast iron, Bronze, Stainless steel Duplex SS.
	Features	: Suitable for raw water pumping in large quantities for power plants, for irrigation, etc. or pumping water in deep wells or fire pumps can be installed on the mouth to save space, including being a fuel delivery pump. Because it can suck deep into the bottom of the tank, etc., can use the electric motor Or diesel engines in pumping As needed, the MMTV model is also suitable for using condensate pump in the power plant.

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA CFV / CFV-sm vertical mixed-flow volute pump

Description

The TORISHIMA CFV is a vertical mixed-flow volute pump,mainly used as relay pumps in sewage treatment system.
The solids handling design prevents clogging of the pump casing and impeller.
Number of vanes can be reduced depending on the condition of sewage.
The volute casing is equipped with a window for easy internal inspection.
Single-floor type, two and three-floor type installation available.

Technical Data

Total Head	3 to 100m / 10 to 328ft
Capacity	120～210,000m³/h / 528 to 924,000USgpm
Size	150～5,000mm

This vertical volute casing pump has a wide  head range, from low heads suitable for  mixed-flow pumps to high heads. The casing  is designed so that sewage cannot clog in it.  This pump can be spplied under both positive  suction head (+) and suction lift (-).

General specifications ranges  Total head 5 to 30m (16 to 98ft) Capacity 3 to 150m 3 /min (792 to 39,630U.S.gpm) Size DN200 to 1,000mm (DN8 to 40in) In addition to the above operating range, special and larger size pumps are also available

>>>DOWNLOAD KATALOG TORISHIMA CFV<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA VERTICAL PUMP TORISHIMA SPV DUPLEX SUPERDUPLEX

Horizontal shaft mixed flow pump

Features
This is a mixed flow pump with a casing that can be divided into two horizontal parts. Just remove the upper casing,
Maintenance and inspection inside the pump is easy. Dry management operation is possible by using an oil circulation system for the underwater bearing.
Application :
Agriculture
For drainage
River
Drainage
Storm surge and harbor measures
Drainage

specification
Total head 2-9m
Flow rate 600-36,000m³ / h
Caliber  400-2,000mm

SPV
VERTICAL PUMPS > SPV
                                                                   

VERTICAL MIXED FLOW PUMPS

Whatever process you operate ; Power, Desalination, Petrochemical, LNG, Water Treatment or Supply, Drainage or General Industrial, the complete plant operation depends on the reliable performance of the main intake, cooling or seawater pumps. Torishima's reputation for providing reliable mixed flow pumps to operate in critical processes throughout a wide range of industries is second to none. With several thousand pump operating world wide you can count on Torishima pumps to be the driving force behind you pumping requirements.

MATERIAL
Critical applications require pumps from a manufacturer who has proven experience in a wide range of applications and materials. Torishima provides a wide range of expertise in material selection and has experience in manufacturing pumps from the following materials:

Pumps Diffuser Casing & Impellers
-  Cast iron, Ductile Iron, Ni Resist Cast Iron
-  Bronze, Aluminium Bronze
-  Stainless Steel
-  Duplex and Super Duplex Stainless Steel

Shaft
-  Carbon Steel
-  Stainless Steel, Austenitic SS
-  Duplex and Super Duplex Stainless Steel

Discharge Bend and Rising Main
-  Cast Iron, and Rising Cast Iron
-  Carbon Steel
-  Stainless Steel
-  Duplex and Super Duplex Stainless Steel

TECHNICAL DATA
Total Head     :  up to 100 m
Capacity        :  up to 1360 m3/min (360,000 USgpm)
Size               :  300 to 2800 mm (12" to 110")
Temperature  :  up to 80 Degree Celsius

APPLICATIONS
-  Power              
   Cooling Water, Condensate Pumps, Geothermal Brine Pumps
-  Desalination
   Seawater Intake, Brine Recirculation / Blowdown, Distillate
-  Petrochemical  
   Seawater Intake, Cooling Water, Pipeline Transfer
-  Drainage Application Water & Wastewater
   River Water Intake, Water Transfer, Sludge Transfer 
-  Industrial
   Cooling Water, Firewater

Model	SP/SPV
Application	Vertical, mixed-flow for any application
Head (Max.)	100 m
Temp (Max.)	80°C
Capacity (Max.)	81,600 m³/hr
Discharge size	300 - 2,800 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

Widely used for application with large  capacity and higher head than IS, ISV model,  for intake of cooling water in power plants,  sea water in desalination plants and dock  drainage due to sea water resistant materials  (Ni-resist, etc.).

General specifications ranges  Total head 3 to 100m (10 to 330ft) Capacity 600 to 78,000m 3 /hr (2,640 to 343,500U.S.gpm) Size         DN400 to 3,000mm (DN16 to 120in)

DOWNLOAD KATALOG

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA VERTICAL TORISHIMA MMTV VERTICAL PUMPS Vertical Multistage Pump with Canister / Multi-stages with Barrel

MMTV
VERTICAL PUMPS > MMTV

MMTV - Vertical Multi-Stage Pump with Barrel, using a high pressure vertical barrel centrifugal pump often presents advantages and ensures trouble-free operation, in those cases where the physical layout of the plant precludes the installation of the receiver vessel at a sufficient height to ensure adequate suction head for the pump under all operation conditions. This applies particulary in the case of condensers in power stations. The barrel of the pumps serves as a pit, and by adding the required length of rising main, the pump can be installed at any depth desired.

APPLICATIONS
Pumping hot water and condensate in power stations, especially in cases where the suction head is restricted.

CONSTRUCTION
Vertical pump, single or multi-stage, radially split suction, intermediate and discharge casing : casing clamped together by tiebolts. The motor stool is flanged onto the barrel, which is under suction pressure. The motor stool incorporates the thrust bearing, the shaft seal, the coupling, and also supports the motor.

MATERIAL
-  Casing ; Cast Iron, Ductile Iron, Stainless Cast Steel, Bronze
-  Impeller, the first stage ; Stainless Cast Steel, Bronze, Cast Steel
-  Impeller, the second stage ; Cast Iron, Ductile Iron, 2% Ni Cast Iron
-  Shaft ; Stainless Steel

TECHNICAL DATA
Total Head                           :  up to 490 m (1600 ft)
Capacities                           :  up to 2,900 m3/hr (12,770 U.S.gpm)
Size                                     :  40 to 350 mm (1 1/2 to 14 in)
Speed                                 :  up to 3,600 min
Pump Suction Pressure      :  up to 19.6 bar (285 psi)
Pump Discharge Pressure  :  up to 39.2 bar (570 psi)

APPLICATIONS
Pumping hot water and condesate in power stations, especially in cases where the suction head is restricted

Description

The Torishima MMTV is a vertical mixed-flow multistage pump with canister, mainly applied as a condensate pump in power plants.

The high pressure vertical canister pump presents significant advantage inthose cases where limited suction head is available. This applies particularly in the case of condensers in power stations, desalination plants and other pipeline pumping applications. The canister serves as a suction receiver, and
by adding the length to the canister / pump, advantage suction head can be provided to ensure trouble-free operation.

Technical Data

Total Head	up to 490m / up to 1,568ft
Pressure	up to 3.9MPa / up to 565psi
Capacity	up to 2,900m³/h / up to 12,760USgpm
Temperature	up to 200°C / 392°F
Size	40 to 400mm

This pump is vertical barrel type pump with specially wide suction inlets and specially designed vanes. It can be installed at low positions. As a result, this type is most suitable for use as a condensate pump at thermal power stations, where sufficient suction pressure is not difficult to achieve because of construction requirements.

General specifications ranges  Dis. Pres. up to 3.92MPa (40kg/cm 2 ) Total head up to 780m (2,560ft) Capacity up to 4,000m 3 /hr (17,610U.S.gpm) Temperature   up to 200deg.C (392deg.F) Size DN40 to 500mm (DN1 to 20in)

DOWNLOAD KATALOG

DOWNLOAD KATALOG MMTV TORISHIMA

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA VERTICAL MULTISTAGE LF VERTICAL PUMPS TORISHIMA

LF VERTICAL PUMPS > LF  VERTICAL MULTI STAGE LF series are industrial pumps of vertical multi-stage, usually pumped thin liquid, not containing solid particles or fibres. The liquid must not attack pump attack the material chemically. When it pumping liquid with a density or viscosity higher that that of water, motor with higher output must be used, if required. APPLICATION - Waterworks Filtrate and Transfer - Pressurized pipeline - Pressurized High-rise and Hotel - Industry Water Supply - Flow Water Systems - Washing Systems - Feed Water and Condensate Systems - Agriculture Irrigation   - High-pressure Filtration Systems - Booster Systems - Distillation Systems SPECIFICATION Capacity                      :  Up to 110 m3/h Total Head                   :  Up to 330 m Product Temperature   :  Up to 70 Degree Celsius (Option : Up to 12 Degree Celsius) Pump Size                   :  25 mm - 11 mm Material - Pump Casing             :  AISI 304 - Impeller                      :  AISI 304 - Shaft                          :  AISI 316 Shaft Seal                    :  Mechanical Seal Coupling                      :  Carbon Steel Coupling Guard           :  AISI 304 Base Frame                 :  FC250 ELECTRIC MOTOR - Full Enclosed Air Blast - Two Poles Standard Motor - Protection Class : IP55, IP54, IP44 - Insulation Class  : B, F - Industry Water Supply - 50 Hz Standard Voltage :     - 3 X 200 - 220 / 346 - 380 V    - 3 X 200 - 240 / 380 - 415 V    - 1 X 220 - 230 / 240 V VERTICAL  MULTI  STAGE  PUMP : Merk             : TORISHIMA Type            : LF 4-14 Cap.             : 5 M3/ Hr Head Max.     : 100 M Power           : 3 KW/ 4 HP/ 380 V/ 50 HZ/ 2 Pole/ 2950 RPM

PANEL  CONTROL  JOCKEY  PUMP :


>>>>DOWNLOAD KATALOG TORISHIMA LF<<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA VERTICAL TORISHIMA IS - ISV VERTICAL PUMPS Axial-flow propeller pump

IS - ISV
VERTICAL PUMPS > IS - ISV

IS - Horizontal Axial - Flow Propeller Pump
ISV - Vertical Axial - Flow Propeller Pump

IS and ISV are the very excellent pumps in the reliability, proved by the many years' actual results and the latest technology. Mainly applied for drainage pumps in case of low head and large capacity condition. The axially split design of horizontal type IS gives easy maintenance without removing the lower casing. The moveable propeller of vertical type ISV enables to control the flow capacity.

SPECIFICATIONS
Total Head            1.5 to 8 m / 4.8 to 16 ft
Capacity               11 m3/min to 3,100 m3/min
Temperature         0 to 40 Degree Celsius
Size                      400 to 4,600 mm

APPLICATIONS
Sewerage, Flood Control, Irrigation, Cooling Water, etc

FEATURES
- Compact construction with Cylindrical Casing enable the installation on the smaller space compared with mixed flow pumps.
- Easy maintenance due to the simple construction. In case of horizontal IS type, upper casing can be removed without dismantling the connection pipeworks.   
- Large water passing area is also suitable for sewage application.
- Motor overloading can be avoided as the pump starts after opening of discharge valve
- Less required power in the operation at lower head than the rated head.

Description

The Torishima IS/ISV are axial-flow propeller pumps,
mainly applied for drainage pumps in case of low head and large capacity condition.
The axially split design of horizontal type IS gives easy maintenance without removing the lower casing.
The movable propeller of vertical type ISV enables to control the flow capacity.

Technical Data

Total Head	1.5 to 5m / 4.8 to 16ft
Capacity	600 to 186,000m³/h / 2,640 to 818,400USgpm
Temperature	up to 40°C / 32°F
Size	400 to 4,600mm

Model	IS/ISV
Application	Axial-flow flood control
Head (Max.)	5 m
Temp (Max.)	40°C
Capacity (Max.)	186,000 m³/hr
Discharge size	400 - 4,600 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

Widely used for applications with low head  and large capacity, this propeller pump is  simple in construction, almost trouble-free,  and highly durable for easier operation and  maintenance. Both fixed vane type and pitch  adjustable vane type are also available.

General specifications ranges  IS ISV Total head 1.5 to 5m (5 to 16ft) Capacity 660 to 36,000m 3 /hr (2,900 to 58,500U.S.gpm) 660 to 186,000m 3 /hr (2,900 to 820,000U.S.gpm) Size DN400 to 2,000mm (DN16 to 80in) DN400 to 4,600mm (DN16 to 184in)

>>>>DOWNLOAD KATALOG TORISHIMA IS / ISV<<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)