Selasa, 13 Agustus 2019

POMPA VERTICAL TORISHIMA MMTV VERTICAL PUMPS Vertical Multistage Pump with Canister / Multi-stages with Barrel


MMTV
VERTICAL PUMPS > MMTV
MMTV - Vertical Multi-Stage Pump with Barrel, using a high pressure vertical barrel centrifugal pump often presents advantages and ensures trouble-free operation, in those cases where the physical layout of the plant precludes the installation of the receiver vessel at a sufficient height to ensure adequate suction head for the pump under all operation conditions. This applies particulary in the case of condensers in power stations. The barrel of the pumps serves as a pit, and by adding the required length of rising main, the pump can be installed at any depth desired.
APPLICATIONS
Pumping hot water and condensate in power stations, especially in cases where the suction head is restricted.
CONSTRUCTION
Vertical pump, single or multi-stage, radially split suction, intermediate and discharge casing : casing clamped together by tiebolts. The motor stool is flanged onto the barrel, which is under suction pressure. The motor stool incorporates the thrust bearing, the shaft seal, the coupling, and also supports the motor.
MATERIAL
-  Casing ; Cast Iron, Ductile Iron, Stainless Cast Steel, Bronze
-  Impeller, the first stage ; Stainless Cast Steel, Bronze, Cast Steel
-  Impeller, the second stage ; Cast Iron, Ductile Iron, 2% Ni Cast Iron
-  Shaft ; Stainless Steel


TECHNICAL DATA
Total Head                           :  up to 490 m (1600 ft)
Capacities                           :  up to 2,900 m3/hr (12,770 U.S.gpm)
Size                                     :  40 to 350 mm (1 1/2 to 14 in)
Speed                                 :  up to 3,600 min
Pump Suction Pressure      :  up to 19.6 bar (285 psi)
Pump Discharge Pressure  :  up to 39.2 bar (570 psi)
APPLICATIONS
Pumping hot water and condesate in power stations, especially in cases where the suction head is restricted






Description
The Torishima MMTV is a vertical mixed-flow multistage pump with canister, mainly applied as a condensate pump in power plants.
The high pressure vertical canister pump presents significant advantage inthose cases where limited suction head is available. This applies particularly in the case of condensers in power stations, desalination plants and other pipeline pumping applications. The canister serves as a suction receiver, and
by adding the length to the canister / pump, advantage suction head can be provided to ensure trouble-free operation.

Technical Data
Total Headup to 490m / up to 1,568ft
Pressureup to 3.9MPa / up to 565psi
Capacityup to 2,900m³/h / up to 12,760USgpm
Temperatureup to 200°C / 392°F
Size40 to 400mm



This pump is vertical barrel type pump with
specially wide suction inlets and specially
designed vanes. It can be installed at low
positions. As a result, this type is most
suitable for use as a condensate pump at
thermal power stations, where sufficient
suction pressure is not difficult to achieve
because of construction requirements.
General specifications ranges 
Dis. Pres.
up to 3.92MPa (40kg/cm 2 )
Total head
up to 780m (2,560ft)
Capacity
up to 4,000m 3 /hr (17,610U.S.gpm)
Temperature  
up to 200deg.C (392deg.F)
Size
DN40 to 500mm (DN1 to 20in)

DOWNLOAD KATALOG

DOWNLOAD KATALOG MMTV TORISHIMA

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)