MMK/MMLMULTISTAGE PUMPS > MMK/MML
MULTI-STAGE TURBINE PUMPS
At MMK, the axial thrust is balanced by the impeller balance hole
At MML, the axial thrust is balanced by the balance disk.
FEATURES
1. Mounting available either below the pump or at centerline
2. High efficiency impeller
3. Absorption of unbalanced axial thrust by balancing hole for MMK, and by balancing device for MML
4. Renewable shaft protecting sleeve
5. Uncooled packing stuffing box for operating temperature 105 Degree Celsius
6. Variety of nozzle orientation
1. Mounting available either below the pump or at centerline
2. High efficiency impeller
3. Absorption of unbalanced axial thrust by balancing hole for MMK, and by balancing device for MML
4. Renewable shaft protecting sleeve
5. Uncooled packing stuffing box for operating temperature 105 Degree Celsius
6. Variety of nozzle orientation
TECHNICAL DATA
Total Head : up to 420 m
Capacity : up to 240 m3/hr
Size : 40 to 150 mm
Temperature : up to 105 Degree Celsius (non cooling type)
up to 180 Degree Celsius (cooling type)
Total Head : up to 420 m
Capacity : up to 240 m3/hr
Size : 40 to 150 mm
Temperature : up to 105 Degree Celsius (non cooling type)
up to 180 Degree Celsius (cooling type)
BENEFITS
1. Better axial thrust absorption
2. Assured high efficiency (low operational cost)
3. Wide range application
4. Flexible application
5. Eliminate of cooling water free for operation up to 105 Degree Celsius
1. Better axial thrust absorption
2. Assured high efficiency (low operational cost)
3. Wide range application
4. Flexible application
5. Eliminate of cooling water free for operation up to 105 Degree Celsius
APPLICATIONS
Used for general clean water supply duty and in the industry as a boiler feed pump, condensate pump, power water pump, pressure water pump, cooling water pump, hot water circulation pump, etc
Used for general clean water supply duty and in the industry as a boiler feed pump, condensate pump, power water pump, pressure water pump, cooling water pump, hot water circulation pump, etc
Description
The TORISHIMA MMK and MML are horizontal, radially split ring section pumps, single flow.The casings are sealed by flat gasket and held together by the bolts. The stage casing and the tie bolts are encased in a steel cladding.
The pump feet are arranged either below the pump or at centre line accordig to the enumber of stages and the temperature.
The axial thrust force of the MMK type is
balanced by the impeller balancing hole and
that of the MML type by the balancing disk,
so that the pumps can be driven with
complete safety at high speed. Axial suction
execution with special first stage impeller can
be adopted in case of severe suction
condition.
Technical Data
Total Head : up to 500m / 1,640ft
Capacity : up to 1,800m³/h / 7,930 USgpm
Temperature : up to 250°C / 482°F
Suction pressure : up to 2.9MPa / 426psi
Discharge pressure : up to 5.3MPa / 767psi
Speed : up to 3,600min-1
| Model | MML |
| Application | Boiler feed condensate |
| Head (Max.) | 500 m |
| Temp (Max.) | 250°C |
| Capacity (Max.) | 1,800 m³/hr |
| Discharge size | 40 - 350 mm |
| Material Casing | Cast iron, Ductile cast iron, Stainless steel, Duplex SS. |
| Impeller | Cast iron, Bronze, Stainless steel, Duplex SS. |
| Shaft+Sleeve | Bronze, Stainless steel, Duplex SS. |
| Model | MMK |
| Application | Boiler feed condensate |
| Head (Max.) | 500 m |
| Temp (Max.) | 250°C |
| Capacity (Max.) | 1,800 m³/hr |
| Discharge size | 40 - 350 mm |
| Material Casing | Cast iron, Ductile cast iron, Stainless steel, Duplex SS. |
| Impeller | Cast iron, Bronze, Stainless steel, Duplex SS. |
| Shaft+Sleeve | Bronze, Stainless steel, Duplex SS. |
General specifications ranges
MMK
|
MML
| |
Total head
|
up to 150m (492ft)
|
up to 500m (1640ft)
|
Capacity
|
up to 1,200m 3 /hr (5280U.S.gpm)
| |
Temperature
|
up to 250deg.C (482deg.F)
| |
Size
|
DN40 to 350mm (DN1 to 14in)
| |
For more information please contact:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (right click to copy email address)
