TORISHIMA COMPANY PROFILE & GENERAL KATALOG

>>>DOWNLOAD COMPANY PROFILE TORISHIMA<<<

>>>DOWNLOAD GENERAL KATALOG TORISHIMA<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA TGJP SUBMERSIBLE PUMP TGJP SERIES

>>>>>DOWNLOAD KATALOG TORISHIMA TGJP SERIES<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Torishima Large submersible motor pump type SMV / SMRV

Large submersible motor pump

Features
SMV is a submersible motor pump in which a pump and a submersible motor are contained in a single cylinder. There are water seal type and oil seal type motors.

SMRV is an oil-sealed submersible motor pump with a pump suction port located between the motor and pump.
specification
Total head ~ 70m
Flow rate ~ 9,000m³ / h
Caliber 150-1,000mm

>>>>DOWNLOAD KATALOG TORISHIMA SMV / SMRV<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MSH Horizontal axially split multistage volute pump MSH-T Horizontal twin-suction axially split multistage pump

Description
The TORISHIMA MSH series are high pressure, large capacity pumps mainly applied for RO desalination and
water transmission plants. The impellers are positioned in back-to-back arrangement in order to reduce axial thrust.
The impeller & volute casing are designed to obtain optimum efficiency.
The MSH-T has twin-suction branches to provide optimum suction performance. Liquid flows into double-suction 2nd stage impeller through two single-suction impellers that are positioned in back to back. The compact back-to-back arrangement balances axial hydraulic thrust and provides optimum efficiency for high flow operation.
The axially split design of MSH series gives easy maintenance of rotating equipment without removing the lower casing.
The pumps have a wide range of materials from carbon steel to stainless steel (austenitic, duplex stainless steel) depending on handling liquid and site condition.

Technical Data
Total Head up to 800m / 2,600ft
Capacity 400 to 3,000m³/h / 1,700 to 13,200USgpm
Suction pressure up to 1MPa / 145psi
Discharge Pressure 10MPa / 1,450psi

>>>>>DOWNLOAD KATALOG TORISHIMA MSH<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MHH Axially split multistage pump High pressure multi-stage pump

Description
The TORISHIMA MHH is a high pressure, middle capacity pump for high pressure pumps for RO desalination and water transmission pumps.
The diffuser guides flow from impeller discharge to next impeller suction eye. The axial force is compensated by a hydraulic balancing device. The axially split design gives easy maintenance of rotating equipment without disturbing the main pipework.
The pump has a wide range of materials from carbon steel to stainless steel (austenitic, duplex stainless steel) depending on handling liquid and site condition.

High pressure multi-stage centrifugal pumps having various 
designs to meet the requirements in handling 
feed water and condensate in power stations,
R.O. sea water desalination plant, etc.

Technical Data
Total Head up to 800m / 2,600ft
Capacity 250 to 800m³/h / 1,100 to 3,520USgpm
Suction pressure up to 1MPa / 145psi
Discharge pressure up to 10MPa / 1,450psi

General specifications ranges                                       Total head up to 4,200m (13,800ft) Capacity up to 4,900m 3 /hr (21,580U.S.gpm) Temperature up to 230deg.C (446deg.F) Size DN40 to 450mm (DN1 to 18in)

>>>>>>DOWNLOAD KATALOG TORISHIMA MHH<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MHA Horizontal end-suction multistage ring section pump

Description
The TORISHIMA MHA is a ring section high pressure pump for middle-size RO desalination plants.
The diffuser guides flow from impeller discharge to next impeller suction eye. The axial force is compensated by a hydraulic balancing device.
The MHA is designed with full of our accumulated reliable design techniques on high pressure and high speed pumps such as boiler feed pumps for thermal power stations. This highly integrated design results in excellent cost performance and high pump efficiency.
Material selection of the MHA is duplex or super duplex stainless steel depending on customer requirement.

Technical Data
Total Head up to 800m / 2,600ft
Capacity up to 800m³/h / up to 3,500USgpm
Suction pressure up to 1MPa / 145psi
Discharge pressure up to 10MPa / 1,450psi

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

CDKTV Vertical double-suction pump with canister

Description

The TORISHIMA CDKTV is a vertical double-suction pump with canister. It is mainly applied for brine recirculation pumps in seawater desalination plants and hot well pumps in geothermal power plants.

The hydraulic design of the double-suction impeller is optimized to obtain high efficiency whilst keeping the volute casing size and canister inside diameter minimum. Also lower NPSH3 allows higher operating speed compared to conventional single-suction vertical pumps.

This optimized design provides minimized power consumption, plus smaller canister in length and diameter which contribute to reduce the cost of excavation / installation.
Multistage design for higher head is available on cutomers requirement.

Technical Data

Total Head up to 100m / 330ft
Capacity up to 20,000m³/h / 220,000USgpm
Temperature up to 100°C / 212°F
Size 500 to 1,500mm

>>>>>>>DOWNLOAD KATALOG TORISHIMA CDKTV<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA TIPE SP Horizontal shaft mixed flow pump

Horizontal shaft mixed flow pump

Features
This is a mixed flow pump with a casing that can be divided into two horizontal parts. Just remove the upper casing,
Maintenance and inspection inside the pump is easy. Dry management operation is possible by using an oil circulation system for the underwater bearing.
Application :
Agriculture
For drainage
River
Drainage
Storm surge and harbor measures
Drainage

specification
Total head 2-9m
Flow rate 600-36,000m³ / h
Caliber  400-2,000mm

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

IS - Horizontal Axial - Flow Propeller Pump

Widely used for applications with low head  and large capacity, this propeller pump is  simple in construction, almost trouble-free,  and highly durable for easier operation and  maintenance. Both fixed vane type and pitch  adjustable vane type are also available.

General specifications ranges  IS ISV Total head 1.5 to 5m (5 to 16ft) Capacity 660 to 36,000m 3 /hr (2,900 to 58,500U.S.gpm) 660 to 186,000m 3 /hr (2,900 to 820,000U.S.gpm) Size DN400 to 2,000mm (DN16 to 80in) DN400 to 4,600mm (DN16 to 184in)

>>>>DOWNLOAD KATALOG TORISHIMA IS / ISV<<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

CDKS / CDKD Horizontal radially split double-suction pump

Description

The TORISHIMA CDKS / CDKD are horizontal, radially split, double-suction pumps.
Mainly applied for handling liquides of high temperature and pressure in chemical plants and power stations.

Technical Data

Total Head	up to 300m / 960ft
Capacity	up to 3,000m³/h / 13,200USgpm
Temperature	up to 350°C / 662°F
Size	200 to 500mm

>>>>DOWNLOAD KATALOG CDKS / CDKD<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

PERBANDINGAN MMO / MMOV DENGAN MMK / MML

MODEL                                            MMO/MMOV                            MMK/MML

				(Vertical type)	(Horizontal type)
	Cylinder volume (Max.)		:	130 M3/hr	1,800 M3/hr
	High transmission (Max.)		:	400 M.	500 M.
	temperature		:	110 °C	250 °C
	In-out pipe size		:	40 - 800 mm.	40 - 350 mm.
	material	Casing	:	Cast iron, Bronze, Stainless steel, Duplex SS.
	Impeller		:	Cast iron, Bronze, Stainless steel, Duplex SS.
	properties		: Suitable for pumping clean water or sea water and high pressure in industrial plants or power plants such as Boiler feed pump, Sea Water Reverse Osmosis ( SWRO ) feed pump etc. Water pumping works in various high-rise buildings because it is a model that has High efficiency which will help save a lot of energy. Pump seals are available in both Packed gland seal and Mechanical seal.

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

PERBANDINGAN ISV SPV MMTV VERTICAL PUMP TORISHIMA

                               Model                       ISV                     SPV             MMTV

		Axial Flow	Mixed Flow	Multi-stages with Barrel
	Cylinder volume (Max.)	186,000 M3/hr.	68,000 M3/hr.	4,000 M3/hr.
	High transmission (Max.)	8 M.	150 M.	780 M.
	temperature	40 °C	40 °C	200 °C
	In-out pipe size	: 400 - 4,600 mm.	300 - 2,800mm.	40 - 500 mm.
	material	: Cast iron, Bronze, Stainless steel Duplex SS.
	Features	: Suitable for raw water pumping in large quantities for power plants, for irrigation, etc. or pumping water in deep wells or fire pumps can be installed on the mouth to save space, including being a fuel delivery pump. Because it can suck deep into the bottom of the tank, etc., can use the electric motor Or diesel engines in pumping As needed, the MMTV model is also suitable for using condensate pump in the power plant.

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa TORISHIMA CDM / CDMV – Horizontal / Vertical axially split double-suction pump

Description

The TORISHIMA CDM is a horizontal axially split double-suction pump used in a wide range of applications
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.

CDMV is a vertical type of the CDM, installeable at limited space.

Technical Data

Total Head	3 to 400 m / 10 to 1,300 ft
Capacity	9 to 36,000 m³/h / 40 to 158,500 USgpm
Temperature	up to 80°C / 176°F
Size	200 to 2,000 mm

Both casing and bearings can be divided into  upper and lower portions to allow easier  disassembly for inspection. Pumps with large  diameters up to 2000mm are also  standardized. This pump with its rugged  construction and high efficiency, is most  suitable to feed various liquids at municipal  water works plants, steel plants, etc. Vertical  execution is also available.

General specifications ranges  Total head 3 to 700m (10 to 2300ft) Capacity 90 to 36,000m 3 /hr (400 to 158,500U.S.gpm) Temperature up to 80deg.C (176deg.F) Size DN150 to 2000mm (DN6 to 80in)

Model		:	CDM, CDMV (Vertical type)
Capacity (Max.)		:	33,000 M3/hr.
Head (Max.)		:	220 M.
Temperature		:	105 °C
	in/out diameter		:	200 - 1,800 mm.
		Material Casing	: Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
		Impeller	: Cast iron, Bronze, Stainless steel, Duplex SS.
	Shaft+Sleeve		: Bronze, Stainless steel, Duplex SS.
	remarks		: Suitable for pumping large quantities of water such as large urban plumbing systems. Irrigation for agriculture, etc. Pump seals are available in both Packed gland seal and Mechanical seal for limited space. Can use vertical pumps to Save space

Model	CDM
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

>>DOWNLOAD KATALOG TORISHIMA CDM<<

Model	CDMV
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

Applications
Energy Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting
General Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting, Sea water desalination
Building : Water Supply, Drainage, District Heating and Cooling
Water Works : Water Intake, Distribution, Water Supply
Agriculture : Irrigation, Drainage

Others Pipe line Boosting, etc.

>>DOWNLOAD KATALOG TORISHIMA CDMV<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Torishima CPW Hot Water Circulating Centrifugal end suction volute pump

Description

The Torishima CPW is Hot Water Circulating / Circulation  an end-suction volute pump,

mainly used as feed pumps or circulating pumps in high pressure hot water generating plants

Technical Data

Total Head	up to 200m / 672ft
Capacity	up to 1,440m³/h / 6,336USgpm
Pressure	6.3MPa/ 913psi
Temperature	up to 280°C / 536°F
Size	40 to 250mm

>>>>DOWNLOAD KATALOG TORISHIMA CPW<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA MML / MMK MULTI STAGE PUMPS HORIZONTAL MULTI STAGE RING SECTION PUMP

MMK/MMLMULTISTAGE PUMPS > MMK/MML

MULTI-STAGE TURBINE PUMPS
At MMK, the axial thrust is balanced by the impeller balance hole
At MML, the axial thrust is balanced by the balance disk.

FEATURES
1.  Mounting available either below the pump or at centerline
2.  High efficiency impeller
3.  Absorption of unbalanced axial thrust by balancing hole for MMK, and by balancing device for MML
4.  Renewable shaft protecting sleeve
5.  Uncooled packing stuffing box for operating temperature 105 Degree Celsius
6.  Variety of nozzle orientation

TECHNICAL DATA
Total Head     :  up to 420 m
Capacity        :  up to 240 m3/hr
Size              :  40 to 150 mm
Temperature  :  up to 105 Degree Celsius (non cooling type)
                       up to 180 Degree Celsius (cooling type)

BENEFITS
1.  Better axial thrust absorption
2.  Assured high efficiency (low operational cost)
3.  Wide range application
4.  Flexible application
5.  Eliminate of cooling water free for operation up to 105 Degree Celsius

APPLICATIONS
Used for general clean water supply duty and in the industry as a boiler feed pump, condensate pump, power water pump, pressure water pump, cooling water pump, hot water circulation pump, etc

Description

The TORISHIMA MMK and MML are horizontal, radially split ring section pumps, single flow.
The casings are sealed by flat gasket and held together by the bolts. The stage casing and the tie bolts are encased in a steel cladding.
The pump feet are arranged either below the pump or at centre line accordig to the enumber of stages and the temperature.

The axial thrust force of the MMK type is 
balanced by the impeller balancing hole and 
that of the MML type by the balancing disk, 
so that the pumps can be driven with 
complete safety at high speed. Axial suction 
execution with special first stage impeller can 
be adopted in case of severe suction 
condition.

Technical Data
Total Head : up to 500m / 1,640ft
Capacity  :  up to 1,800m³/h / 7,930 USgpm
Temperature : up to 250°C / 482°F
Suction pressure  :  up to 2.9MPa / 426psi
Discharge pressure :  up to 5.3MPa / 767psi
Speed :  up to 3,600min-1

Model	MML
Application	Boiler feed condensate
Head (Max.)	500 m
Temp (Max.)	250°C
Capacity (Max.)	1,800 m³/hr
Discharge size	40 - 350 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

Model	MMK
Application	Boiler feed condensate
Head (Max.)	500 m
Temp (Max.)	250°C
Capacity (Max.)	1,800 m³/hr
Discharge size	40 - 350 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

General specifications ranges 

	MMK	MML
Total head	up to 150m (492ft)	up to 500m (1640ft)
Capacity	up to 1,200m 3 /hr (5280U.S.gpm)
Temperature	up to 250deg.C (482deg.F)
Size	DN40 to 350mm (DN1 to 14in)

>>>>DOWNLOAD KATALOG TORISHIMA MMK / MML<<<<<

For more information please contact:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (right click to copy email address)