CDKS / CDKD Horizontal radially split double-suction pump

Description

The TORISHIMA CDKS / CDKD are horizontal, radially split, double-suction pumps.
Mainly applied for handling liquides of high temperature and pressure in chemical plants and power stations.

Technical Data

Total Head	up to 300m / 960ft
Capacity	up to 3,000m³/h / 13,200USgpm
Temperature	up to 350°C / 662°F
Size	200 to 500mm

>>>>DOWNLOAD KATALOG CDKS / CDKD<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa TORISHIMA CDM / CDMV – Horizontal / Vertical axially split double-suction pump

Description

The TORISHIMA CDM is a horizontal axially split double-suction pump used in a wide range of applications
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.

CDMV is a vertical type of the CDM, installeable at limited space.

Technical Data

Total Head	3 to 400 m / 10 to 1,300 ft
Capacity	9 to 36,000 m³/h / 40 to 158,500 USgpm
Temperature	up to 80°C / 176°F
Size	200 to 2,000 mm

Both casing and bearings can be divided into  upper and lower portions to allow easier  disassembly for inspection. Pumps with large  diameters up to 2000mm are also  standardized. This pump with its rugged  construction and high efficiency, is most  suitable to feed various liquids at municipal  water works plants, steel plants, etc. Vertical  execution is also available.

General specifications ranges  Total head 3 to 700m (10 to 2300ft) Capacity 90 to 36,000m 3 /hr (400 to 158,500U.S.gpm) Temperature up to 80deg.C (176deg.F) Size DN150 to 2000mm (DN6 to 80in)

Model		:	CDM, CDMV (Vertical type)
Capacity (Max.)		:	33,000 M3/hr.
Head (Max.)		:	220 M.
Temperature		:	105 °C
	in/out diameter		:	200 - 1,800 mm.
		Material Casing	: Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
		Impeller	: Cast iron, Bronze, Stainless steel, Duplex SS.
	Shaft+Sleeve		: Bronze, Stainless steel, Duplex SS.
	remarks		: Suitable for pumping large quantities of water such as large urban plumbing systems. Irrigation for agriculture, etc. Pump seals are available in both Packed gland seal and Mechanical seal for limited space. Can use vertical pumps to Save space

Model	CDM
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

>>DOWNLOAD KATALOG TORISHIMA CDM<<

Model	CDMV
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

Applications
Energy Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting
General Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting, Sea water desalination
Building : Water Supply, Drainage, District Heating and Cooling
Water Works : Water Intake, Distribution, Water Supply
Agriculture : Irrigation, Drainage

Others Pipe line Boosting, etc.

>>DOWNLOAD KATALOG TORISHIMA CDMV<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA CDM HORIZONTAL SPLIT CASE DOUBLE SUCTION PUMPS

CDM
HORIZONTAL SPLIT CASE DOUBLE SUCTION PUMPS > CDM

DOUBLE SUCTION PUMP

CDM designed with the most advanced hydraulic profiles. Providing less noise and vibration, wider operating range, lower NPSH, required and higher efficiency.

FEATURES
1.  High efficiency impeller three-dimensional double suction impeller
2.  Horizontal split volume casing designed in accordance with finite element construction analysis
3.  Easily fitted casing wear ring and shaft sleeves
4.  Easily maintenance grease lubricated bearing as standard
5.  Soft-packed stuffing box as standard

TECHNICAL DATA
Total Head      H    up to 180 m
Capacity         Q    up to 4800 m3/hr
Size              DN   200 to 700 mm
Temperature   T    up to 80 Degree Celsius
Available option with vertical construction

BENEFITS
1.  Assured high efficiency (low operational cost)
2.  High speed, compact and light weight design
3.  Stable curve characteristics
4.  Low NPSH required 
3.  Low noise and vibration
4.  Easy maintenance (quick repair work)

APPLICATIONS
Water Intake, Distribution, Boosting, Circulating, Drainage, Fire Fighting, Cooling, Irrigation for Clean Water, Raw Water, Sea Water, Oil, etc.

CENTRIFUGAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Mez, Coupling, Base Plate
DESCRIPTION  MATERIAL :
Casing      : Cast Iron
Impeller     : Bronze
Shalf         : Carbon Steel
Sealling     : Gland Paking
Delivery    : Indent 2-3 Months
CENTRIFUGAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Teco, Coupling, Base Plate
Delivery    : Indent 2-3 Months

>>>>DOWNLOAD KATALOG CDM 200 to 500 mm <<<<

>>>>DOWNLOAD KATALOG CDM 600 to 1400mm<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)