EBARA CN / CC / CW HORIZONTAL DOUBLE SUCTION VOLUTE PUMP

Product Description
Horizontal, single case, Semi-centerline support or foot mount. Axial split Casing, Single-stage. Between bearing.
Double suction 1st impeller.


FEATURES 

• Split case design permits easy disassembly, that is; inspection is simplified, it is not necessary to disturb pump alignment and suction & discharge piping when parts replacement is necessary.
• Double suction with advanced design of suction performance ensures high suction lifts even with large capacities. Compared with conventional double suction design, with the possibility of using a high speed motor, such system and related facilities can be installed in a small area.
• Higher operating efficiency over a wider range of capacities lower operation cost and small motor output are all possible
• Pump operation with low noise, smaller pressure pulsation ensure comfortable environment
• Variable combinations of materials permit wide application.

Bore Size : 200-1000mm ( 8 - 40 ins)

Technical Details

Rating	Capacity		~31000 m3/h
	Size		Φ150~Φ1800
	Liquid		clear water industrial water river water
	Temperature		0~120℃
	Head		~100m

Applications:

Water Supply/Transfer Pump

Boiler Feed Pump

Circulation Pump

Utility Pump

Seawater Circulation Pump

>>>>DOWNLOAD KATALOG EBARA CN<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA CSA/CNA Horizontal split casing pump

CNA (Horizontal Split Casing Pump)
Features
Very compact design for ease of installation and permits minimum maintenance.
Axially split casing allows the easy removal of the top casing for inspection and service.
A wider range of performance with head up to 150 m.
High speed drives and vertical mount available.           
Anti-corrosion materials used on the rotating parts.
High quality sealed and cartridge type bearing unit provide high durability.
High allowable working pressure can ensure stable running.
Mechanical seal for easy maintenance.

Application:
Water supply
Hot and cold water circulation
For cooling tower
Irrigation
Industrial use
Drainage
Sprinkling
Air-conditioning
For swimming pool

Technical Data: 
Flow : 30 to 480 mᶾ/hr
Head : 150 to 35 m
Motor : 15 to 220 kW
Speed : 2,900 rpm
Liq. Temp : up to 80°C 3ph, 50 Hz
Flow : 18 to1800 mᶾ/hr
Head : 140 to 7 m
Motor : 2.2 to 450 kW
Speed : 1,450 rpm
Liq. Temp : up to 80°C
3ph, 50 Hz
Material:
Casing : Cast iron / ductile cast iron
Impeller : Bronze / SS304 / SS316





Applications:
Pumping clean water for HVAC systems, cooling towers, pumping stations, large scale irrigation, river water intake and industrial applications.

Building

• Water supply
• Drainage
• Water circulation
• Fire fighting

Irrigation

• Water supply
• Drainage

Water Work

• Water intake
• Booster
• Water supply

Industrial Use

• Water intake
• Booster
• Circulation
• Drainage
• Chemical

>>>DOWNLOAD KATALOG EBARA CSA/CNA<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA TIPE SP Horizontal shaft mixed flow pump

Horizontal shaft mixed flow pump

Features
This is a mixed flow pump with a casing that can be divided into two horizontal parts. Just remove the upper casing,
Maintenance and inspection inside the pump is easy. Dry management operation is possible by using an oil circulation system for the underwater bearing.
Application :
Agriculture
For drainage
River
Drainage
Storm surge and harbor measures
Drainage

specification
Total head 2-9m
Flow rate 600-36,000m³ / h
Caliber  400-2,000mm

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

IS - Horizontal Axial - Flow Propeller Pump

Widely used for applications with low head  and large capacity, this propeller pump is  simple in construction, almost trouble-free,  and highly durable for easier operation and  maintenance. Both fixed vane type and pitch  adjustable vane type are also available.

General specifications ranges  IS ISV Total head 1.5 to 5m (5 to 16ft) Capacity 660 to 36,000m 3 /hr (2,900 to 58,500U.S.gpm) 660 to 186,000m 3 /hr (2,900 to 820,000U.S.gpm) Size DN400 to 2,000mm (DN16 to 80in) DN400 to 4,600mm (DN16 to 184in)

>>>>DOWNLOAD KATALOG TORISHIMA IS / ISV<<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa TORISHIMA CDM / CDMV – Horizontal / Vertical axially split double-suction pump

Description

The TORISHIMA CDM is a horizontal axially split double-suction pump used in a wide range of applications
such as seawater desalination plants, power plants, water and waste water, water transmission and irrigation etc.
Double suction and three-dimensional impeller gives low NPSH requirements and high efficiency. Upper half casing
can be simply disassembled without disturbing pipework. This enables easy maintenance and routine inspection.

CDMV is a vertical type of the CDM, installeable at limited space.

Technical Data

Total Head	3 to 400 m / 10 to 1,300 ft
Capacity	9 to 36,000 m³/h / 40 to 158,500 USgpm
Temperature	up to 80°C / 176°F
Size	200 to 2,000 mm

Both casing and bearings can be divided into  upper and lower portions to allow easier  disassembly for inspection. Pumps with large  diameters up to 2000mm are also  standardized. This pump with its rugged  construction and high efficiency, is most  suitable to feed various liquids at municipal  water works plants, steel plants, etc. Vertical  execution is also available.

General specifications ranges  Total head 3 to 700m (10 to 2300ft) Capacity 90 to 36,000m 3 /hr (400 to 158,500U.S.gpm) Temperature up to 80deg.C (176deg.F) Size DN150 to 2000mm (DN6 to 80in)

Model		:	CDM, CDMV (Vertical type)
Capacity (Max.)		:	33,000 M3/hr.
Head (Max.)		:	220 M.
Temperature		:	105 °C
	in/out diameter		:	200 - 1,800 mm.
		Material Casing	: Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
		Impeller	: Cast iron, Bronze, Stainless steel, Duplex SS.
	Shaft+Sleeve		: Bronze, Stainless steel, Duplex SS.
	remarks		: Suitable for pumping large quantities of water such as large urban plumbing systems. Irrigation for agriculture, etc. Pump seals are available in both Packed gland seal and Mechanical seal for limited space. Can use vertical pumps to Save space

Model	CDM
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

>>DOWNLOAD KATALOG TORISHIMA CDM<<

Model	CDMV
Application	High capacity for general industries circulation, Fire-fighting
Head (Max.)	300 m
Temp (Max.)	Up to 80°C
Capacity (Max.)	33,000 m³/hr
Discharge size	200 - 1,400 mm
Material Casing	Cast iron,304 Stainless steel,316 Stainless steel
Impeller	Cast iron,Bronze,304 Stainless steel,316 Stainless steel
Shaft	Stainless steel, Duplex Stainless steel

Applications
Energy Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting
General Industry : Water Intake, Distribution, Boosting, Circulation, Drainage, Fire Fighting, Sea water desalination
Building : Water Supply, Drainage, District Heating and Cooling
Water Works : Water Intake, Distribution, Water Supply
Agriculture : Irrigation, Drainage

Others Pipe line Boosting, etc.

>>DOWNLOAD KATALOG TORISHIMA CDMV<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA HORIZONTAL CDM TORISHIMA

HORIZONTAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Mez, Coupling, Base Plate

DESCRIPTION  MATERIAL :
Casing      : Cast Iron
Impeller     : Bronze
Shalf         : Carbon Steel
Sealling     : Gland Paking
Delivery    : Indent 2-3 Months

HORIZONTAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Teco, Coupling, Base Plate
Delivery    : Indent 2-3 Months

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA CDM HORIZONTAL SPLIT CASE DOUBLE SUCTION PUMPS

CDM
HORIZONTAL SPLIT CASE DOUBLE SUCTION PUMPS > CDM

DOUBLE SUCTION PUMP

CDM designed with the most advanced hydraulic profiles. Providing less noise and vibration, wider operating range, lower NPSH, required and higher efficiency.

FEATURES
1.  High efficiency impeller three-dimensional double suction impeller
2.  Horizontal split volume casing designed in accordance with finite element construction analysis
3.  Easily fitted casing wear ring and shaft sleeves
4.  Easily maintenance grease lubricated bearing as standard
5.  Soft-packed stuffing box as standard

TECHNICAL DATA
Total Head      H    up to 180 m
Capacity         Q    up to 4800 m3/hr
Size              DN   200 to 700 mm
Temperature   T    up to 80 Degree Celsius
Available option with vertical construction

BENEFITS
1.  Assured high efficiency (low operational cost)
2.  High speed, compact and light weight design
3.  Stable curve characteristics
4.  Low NPSH required 
3.  Low noise and vibration
4.  Easy maintenance (quick repair work)

APPLICATIONS
Water Intake, Distribution, Boosting, Circulating, Drainage, Fire Fighting, Cooling, Irrigation for Clean Water, Raw Water, Sea Water, Oil, etc.

CENTRIFUGAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Mez, Coupling, Base Plate
DESCRIPTION  MATERIAL :
Casing      : Cast Iron
Impeller     : Bronze
Shalf         : Carbon Steel
Sealling     : Gland Paking
Delivery    : Indent 2-3 Months
CENTRIFUGAL  PUMP :
Merk         : TORISHIMA
Type         : CDM 300 X 250 KN
Power       : 45 KW/ 60 HP/ 380 V/ 50 HZ/ 3 PHASE/ 4 POLE/ 1450 Rpm
C/W Motor Teco, Coupling, Base Plate
Delivery    : Indent 2-3 Months

>>>>DOWNLOAD KATALOG CDM 200 to 500 mm <<<<

>>>>DOWNLOAD KATALOG CDM 600 to 1400mm<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)