CNP CDL / CDLF - Light Vertical Multistage Pump

CNP CDL/CDLF - Light Vertical Multistage Centrifugal Pump   
CNP Southern Pump
CDL / CDLF Series
Light Vertical Multistage Centrifugal Pump




CDL,CDLF

Vertical multistage stainless steel centrifugal pump

Applications:   
Cooling water system   
Municipal water supply and boosting 
Domestic water supply   
Irrigation    
General industrial services  
Washing plants   
Boiler feed and condensate system  
Water treatment   

Performance range:   
Capacity:     Q up to 240m3/h  
Head:         H up to 305m  
Temperature:  T up to 120℃
Speed:        n 2900rpm or 3500rpm        
Power:        P up to 110kw  

Standard material:  
All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request too.

Description :  
Close coupled vertical multistage pump with stainless steel parts which be driven by a standard TEFC motor, discharge and suction in the same line.
Single phase motor up to 2.2kw, Class F and IP55 are standard.
Standard supply for liquid temperature up to 70℃, high temperature pump are available on request.
Mechanical seal is Tungsten Carbide/Graphite, other material is available on request

Specification and Application
CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump,which is driven by a standard electric motor.The motor output shaft directly connects with the pump shaft through a coupling.The pressure-resistant cylinder and flow passage components are fixed between pump head and in-and outlet section with tie-bar bolts.The inlet and outlet are located at the pump bottom at the same plane.This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running,out-of-phase and overload.

Application
CDL/CDLF is a kind of multifunctional products.It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure.CDL type is applicable to conveying non-corrosive liquid,While CDLF is suitable for slightly corrosive liquid.
- Water supply:Water filter and transport in Waterworks,boosting of main pipeline,boosting in high-rise buildings.
- Industrial boosting:Process flow water system,cleaning system,high-pressure washing system,fire fighting system
- Industrial liquid conveying:Cooling and air-conditioning system,boiler water supply and condensing system,machine-associated purpose,acids and alkali
- Water treatment:Ultrafiltration system, reverse osmosis system,distillation system,swimming pool,separator
- Irrigation:Farmland irrigation,spray irrigation,dripping irrigation
 
     Flow rated
     0.4 ~ 180 m3/h
    
     Total Head
     Max. 305 m
    
     Liquid Temperature
     -15oC ~ +120oC
    

Type	Rated Flow	Max Pressure
	[m3/h]	[bar]
CDL 1	1	21
CDL 2	2	23
CDL 3	3	22
CDL 4	4	21
CDL 8	8	21
CDL 12	12	22
CDL 16	16	22
CDL 20	20	23
CDL 32	32	26
CDL 42	42	30
CDL 65	65	22
CDL 85	85	17
CDL 120	120	16
CDL 150	150	16

>>>>DOWNLOAD KATALOG CNP CDL / CDLF<<<<<




Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA MSS / MSSH HORIZONTAL MULTI STAGE RING SECTION CASING DIFFUSER TYPE FOR HIGH PRESSURE SERVICE

Product Description
(1) The specially designed impeller of the first stage achieves low NPSHR to prevent cavitation.
(2) The thrust of all shafts is completely balanced by the balance disk.
Foot support, Ring section
Multistage, Diffuser type casing
Tandem impeller arrangement
MSS/MSSH Ring Section Pumps MSS/MSSH series pumps are horizontal ,single casing, ring section, multistage structure. With simplified construction, MSS/MSSH can be highly efficient and reliable. Applications Boiler feed Processing water supply City high pressure water supply Ratings Flow (Q): to 324 m3/h Maximum allowable operation pressure : to 5.74MPa.  Maximum allowable suction pressure: 2.45MPa. Temperature range: to 165℃

Technical Details

■Standard Specifications

Liquid		Water/Boiler feed water(0～165℃)
Suction requirment		Positive suction pressure or boost
Max.Allowable suction pressure		2.45MPa
Construction	Impeller	Enclosed
	Shaft seal	Gland packing
	Bearing	Coupling side：Roller bearing(Oil bath)
		Opposite coupling side：Ball bearing(Oil bath)
Flange	Suction side	JIS10K FF
	Discharge side	JIS20K RF、30K RF、40K RF
Materials		Standard type		Stainless type
	Suction casing	FCD540-3K		SCS13
	Intermediate casing	FCD540-3K/SCPH21		SCS13
	Discharge casing	SCPH21		SCS13
	Impeller	FCD540-3K		SCS13
	Shaft	SCM435		SUS630
	Shaft sleeve	SUS420J2		SUS304
Nozzle direction		*1

*1. Nozzle direction

Bore size (mm)	50X40～100X80	125X100、150X125
Suction	TOP	SIDE
Discharge	TOP	TOP

Capacity upto 324 m3/h (1430 U.S.gpm)

Head upto 810 m (2660 ft)

Temperature upto 165℃ (329℉)

Flange Rating upto ASME Class 600 Ib

Others are also available

Applications:

Boiler Feed

Processing Water

Other Industries

>>>>DOWNLOAD KATALOG EBARA MSS / MSSH<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA COMPACT HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS / POMPA

COMPACT
Horizontal multistage
compact
HORIZONTAL MULTISTAGE CENTRIFUGAL ELECTRIC PUMPS

in cast iron
Applications:
Domestic pressure boosting
Residensial /Household
General pressure increases
Small-scale garden irrigation
Washing vehicles
Moving clean water

Technical Details:
Particularly silent
Light and easy to handle

Pump Data:
Maximum working pressure: 10 bar
Maximum temperature of the liquid: 40°C
G1 for COMPACT A, G1¼; for COMPACT B of the range
G1 discharge connection

Motor Data:
High efficiency motors IE2 and IE3 starting from 0,75kW
Self-ventilated 2 pole asynchronous motor
Class of insulation F
IP44 Protection degree
230V ±10%, 50Hz single phase voltage,
230/400V ±10%, 50Hz three phase voltage
Permanent capacitor inserted and thermo-amperometric protection
with automatic rearm incorporated for the single phase motor
Protection under user’s responsibility for the three phase version

Material:
Cast iron pump casing and bracket
External casing in AISI 304
Impeller and diffuser in PPE+PS reinforced with fibreglass
Stages in PPE+PS reinforced with fibreglass/PTFE
Shaft in AISI 416
Mechanical seal in Carbon/Ceramic/NBR

>>>>>>DOWNLOAD KATALOG EBARA COMPACT<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MSH Horizontal axially split multistage volute pump MSH-T Horizontal twin-suction axially split multistage pump

Description
The TORISHIMA MSH series are high pressure, large capacity pumps mainly applied for RO desalination and
water transmission plants. The impellers are positioned in back-to-back arrangement in order to reduce axial thrust.
The impeller & volute casing are designed to obtain optimum efficiency.
The MSH-T has twin-suction branches to provide optimum suction performance. Liquid flows into double-suction 2nd stage impeller through two single-suction impellers that are positioned in back to back. The compact back-to-back arrangement balances axial hydraulic thrust and provides optimum efficiency for high flow operation.
The axially split design of MSH series gives easy maintenance of rotating equipment without removing the lower casing.
The pumps have a wide range of materials from carbon steel to stainless steel (austenitic, duplex stainless steel) depending on handling liquid and site condition.

Technical Data
Total Head up to 800m / 2,600ft
Capacity 400 to 3,000m³/h / 1,700 to 13,200USgpm
Suction pressure up to 1MPa / 145psi
Discharge Pressure 10MPa / 1,450psi

>>>>>DOWNLOAD KATALOG TORISHIMA MSH<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MHH Axially split multistage pump High pressure multi-stage pump

Description
The TORISHIMA MHH is a high pressure, middle capacity pump for high pressure pumps for RO desalination and water transmission pumps.
The diffuser guides flow from impeller discharge to next impeller suction eye. The axial force is compensated by a hydraulic balancing device. The axially split design gives easy maintenance of rotating equipment without disturbing the main pipework.
The pump has a wide range of materials from carbon steel to stainless steel (austenitic, duplex stainless steel) depending on handling liquid and site condition.

High pressure multi-stage centrifugal pumps having various 
designs to meet the requirements in handling 
feed water and condensate in power stations,
R.O. sea water desalination plant, etc.

Technical Data
Total Head up to 800m / 2,600ft
Capacity 250 to 800m³/h / 1,100 to 3,520USgpm
Suction pressure up to 1MPa / 145psi
Discharge pressure up to 10MPa / 1,450psi

General specifications ranges                                       Total head up to 4,200m (13,800ft) Capacity up to 4,900m 3 /hr (21,580U.S.gpm) Temperature up to 230deg.C (446deg.F) Size DN40 to 450mm (DN1 to 18in)

>>>>>>DOWNLOAD KATALOG TORISHIMA MHH<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

MHA Horizontal end-suction multistage ring section pump

Description
The TORISHIMA MHA is a ring section high pressure pump for middle-size RO desalination plants.
The diffuser guides flow from impeller discharge to next impeller suction eye. The axial force is compensated by a hydraulic balancing device.
The MHA is designed with full of our accumulated reliable design techniques on high pressure and high speed pumps such as boiler feed pumps for thermal power stations. This highly integrated design results in excellent cost performance and high pump efficiency.
Material selection of the MHA is duplex or super duplex stainless steel depending on customer requirement.

Technical Data
Total Head up to 800m / 2,600ft
Capacity up to 800m³/h / up to 3,500USgpm
Suction pressure up to 1MPa / 145psi
Discharge pressure up to 10MPa / 1,450psi

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA TORISHIMA MML / MMK MULTI STAGE PUMPS HORIZONTAL MULTI STAGE RING SECTION PUMP

MMK/MMLMULTISTAGE PUMPS > MMK/MML

MULTI-STAGE TURBINE PUMPS
At MMK, the axial thrust is balanced by the impeller balance hole
At MML, the axial thrust is balanced by the balance disk.

FEATURES
1.  Mounting available either below the pump or at centerline
2.  High efficiency impeller
3.  Absorption of unbalanced axial thrust by balancing hole for MMK, and by balancing device for MML
4.  Renewable shaft protecting sleeve
5.  Uncooled packing stuffing box for operating temperature 105 Degree Celsius
6.  Variety of nozzle orientation

TECHNICAL DATA
Total Head     :  up to 420 m
Capacity        :  up to 240 m3/hr
Size              :  40 to 150 mm
Temperature  :  up to 105 Degree Celsius (non cooling type)
                       up to 180 Degree Celsius (cooling type)

BENEFITS
1.  Better axial thrust absorption
2.  Assured high efficiency (low operational cost)
3.  Wide range application
4.  Flexible application
5.  Eliminate of cooling water free for operation up to 105 Degree Celsius

APPLICATIONS
Used for general clean water supply duty and in the industry as a boiler feed pump, condensate pump, power water pump, pressure water pump, cooling water pump, hot water circulation pump, etc

Description

The TORISHIMA MMK and MML are horizontal, radially split ring section pumps, single flow.
The casings are sealed by flat gasket and held together by the bolts. The stage casing and the tie bolts are encased in a steel cladding.
The pump feet are arranged either below the pump or at centre line accordig to the enumber of stages and the temperature.

The axial thrust force of the MMK type is 
balanced by the impeller balancing hole and 
that of the MML type by the balancing disk, 
so that the pumps can be driven with 
complete safety at high speed. Axial suction 
execution with special first stage impeller can 
be adopted in case of severe suction 
condition.

Technical Data
Total Head : up to 500m / 1,640ft
Capacity  :  up to 1,800m³/h / 7,930 USgpm
Temperature : up to 250°C / 482°F
Suction pressure  :  up to 2.9MPa / 426psi
Discharge pressure :  up to 5.3MPa / 767psi
Speed :  up to 3,600min-1

Model	MML
Application	Boiler feed condensate
Head (Max.)	500 m
Temp (Max.)	250°C
Capacity (Max.)	1,800 m³/hr
Discharge size	40 - 350 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

Model	MMK
Application	Boiler feed condensate
Head (Max.)	500 m
Temp (Max.)	250°C
Capacity (Max.)	1,800 m³/hr
Discharge size	40 - 350 mm
Material Casing	Cast iron, Ductile cast iron, Stainless steel, Duplex SS.
Impeller	Cast iron, Bronze, Stainless steel, Duplex SS.
Shaft+Sleeve	Bronze, Stainless steel, Duplex SS.

General specifications ranges 

	MMK	MML
Total head	up to 150m (492ft)	up to 500m (1640ft)
Capacity	up to 1,200m 3 /hr (5280U.S.gpm)
Temperature	up to 250deg.C (482deg.F)
Size	DN40 to 350mm (DN1 to 14in)

>>>>DOWNLOAD KATALOG TORISHIMA MMK / MML<<<<<

For more information please contact:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (right click to copy email address)

POMPA CENTRIFUGAL MULTI STAGE PUMP EBARA TIPE MS

MS
Horizontal Multistage Pump
EBARA’s unique double volute construction provides higher efficiency over a wide range of capacities than conventional pumps equipped with a guide vanes.
Simple construction of the pumps contributes to longer service life. The pumps are compact, lightweight and operate with minimum of noise.
Double volute casing designed to balance radial force at all range of operation. Axial force is absorbed by a balance-disc which has a wear indicator at shaft end.
Parts are fully standardized to ensure easy servicing and maintenance.
The pumps are designed so as to not exceed rated horse power at any pumping quantity. (Model MS410 MS420)
Has a double volute without guiding vanes has been adapted resulting in a larger volume being expelled with a high efficiency.
The simplicity of the structure results in high durability.
Type-Ⅱ has a ball shaped bearing, thus not needing refueling and requiring little maintainance.

APPLICATIONS:
Water supply
Hot/cold water
Sprinklers
Agriculture
Construction
Factories
Mines
Boiler feed
Clean water pressure boosting for high rise buildings, boiler feed, water filtration, reverse osmosis, sprinklers, irrigation and mining.
Other general high pressure services

Technical Details

Liquids handled		Clear water
Temperature		0 ~ 80 ℃
Maximum Working Pressure		0.4MPa
Construction	Impeller	Closed
	Shaft seal	grand packing
	Bearings	Ball bearings (oil bath)
Material	Casing	FC200
	Impeller	SUS304/CAC406 CALIBER 40,50
	Spindle	S35C

Technical Data:
Flow : 6 to 150 mᶾ/hr
Head : 120 to 13 m
Motor : 1.5 to 55 kW
Speed : 1,450 rpm
Liq. Temp : 0 to 80°C 3ph, 50 Hz
Material:
Casing : Cast iron
Impeller : SS 304 & Bronze

CENTRIFUGAL  MULTI  STAGE  PUMP :
Merk                : EBARA
Type                : 100X80 MS-2
Cap.                 : 80 M3/ Hr
Head               : 116 M
Power              : 30 KW/ 40 HP/ 3 Phase/ 380 V/ 50 HZ/ 2950 RPM               
C/W Motor Teco, Coupling, Base Plate

>>>DOWNLOAD KATALOG EBARA MS<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA CENTRIFUGAL SELF PRIMING MULTI STAGE PUMP GAE SERO TORISHIMA

GAE SERO  

   

1.1 Uraian  

Pompa SERO jenis SON / SOB dan SRN/SRB adalah pompa centrifugal self-priming bertingkat banyak.  

Digunakan hanya untuk cairan bersih tanpa adanya kotoran. Untuk setiap keadaan harus dicegah masuknya benda-benda  

asing ke dalam pompa seperti kotoran atau butiran keras. Cairan harus selalu mengalir dalam pompa. Pompa tidak boleh  

di biarkan bekerja tanpa adanya air.  

   

Garansi  

Pompa di garansi terhadap kerusakan akibat material,disain, dan pengerjaan, tetapi tidak terhadap kerusakan akibat  

penggunaan atau pengoperasian yang tidak tepat atau tidak mengikuti petunjuk operasi dari pompa.  

   

2.2 INSTALASI POMPA  

   

Kelurusan Pompa  

Pompa dan motor harus dipasang sedemikian rupa pada pelat dasar dimana kelurusan kedua belahan kopling terjamin.  

Untuk mengatur ketinggian pelat dasar pakailah pelat baja, kemudian tuangkanlah adukan semen. Untuk menghindari distorsi,  

kencangkanlah baut pondasi setelah beton mengeras. Kemudian dengan pelurus periksalah kembali kelurusan kedua belahan kopling.  

   

Temperature dan Kwalitas dari cairan  

Temperature tertinggi yang di ijinkan dari cairan adalah 110c untuk pompa dengan stuffing box dan 140c untuk pompa dengan sil mekanis  

catatan : Jika temperature melebihi 90c periksalah tinggi muka air pada sisi isap! Perhatikan bagian mengenai kwalitas dari air  

   

Tinggi Isap Muka Air  

Tinggi isap vertical maxsimum ditambah rugi-rugi akibat gesekan adalah 8,5 meter untuk air dingin. Jika temperature lebih tinggi, mendekati  

titik didih dengan vacum yang tinggi, atau dengan berat jenis yang lebih tinggi,tinggi isap maximum dan tinggi muka air pada sisi  isap masing-masing  

dihitung dengan memperhatikan data-data dari pompa. Setidak-tidaknya lengkapilah pada sisi isap saringan ( penangkap kotoran )  

   

Jika yang di pompa adalah air pengumpan ketel, maka air ini harus mengalir menuju pompa. Tinggi muka air pada sisi isap bergantung pada  

titik kerja dari pompa dan temperature dari air.  

rugi-rugi pada sisi isap harus ditambahkan pada muka air pada sisi isap. Akan lebih baik jika pipa isap dari tangki air pengumpan ketel  

ke flen isap pompa pada posisi vertical. Jika pompa horizontal diperlukan khususnya tepat pada sisi keluar dari tangki air pengumpan ketel  

usahakanlah agar pipa horizontal ini sependek mungkin.  

   

Penyambungan Pipa  

Suction dan Discharge casing diberi tanda dengan anak panah atau pelat nama, hubun gkanlah pipa dengan bebas dari torsi. Perhatikan apakah   

baut-baut segi delapan tidak terlalu panjang sebab jika terlalu panjang akan mengakibatkan pecahnya flen. Berat pipa tidak boleh membebani pompa.  

Untuk cairan yang panas.( diatas 60c)  dan cairan yang dingin ( di bawah 20C )  gunakanlah sistim pemipaan yang dapat memuai dan menyusut. Pipa isap  

dapat diletakkan dengan segala cara yang diinginkan. Pipa isap ini dapat di letakkan lebih tinggi dari pompa karena pompa juga dapat mengisapnya.  

Diameter pipa hisap tidak boleh lebih kecil dari diameter isap pompa. Pipa isap harus berada sedalam mungkin dibawah muka cairan, jarak minimum dari  

dasar tangki 15cm.  

juga pipa tekan dapat diletakkan dengan berbagai cara. Jika head dinamis tinngi atau cairan di pompa ke dalam tangki bertekanan, dianjurkan untuk  

memasang sebuah check valve pada pipa tekan. Hindari belokan -belokan yang tajam pada pipa isap dan tekan.  

Pipa dengan diameter yang kecil dan sangat panjang akan menambah total head dinamis yang akan mengakibatkan motor kelebihan beban.hendaknya  

semua pipa termasuk pipa isap harus bersih dari kotoran dan partikel-partikel keras (tahi las). Periksalah apakah sambungan sudah kencang.  

   

Field Of Application  

Universally suitable for handling all sorts of clean and turbid liquids. The media handled must not contain any abrasive subtances !  

The pumps are used in the chemical and petrochemical industries, in apparatus engineering.  

vehicleand naval construction.in agriculture and building services, for irrigation and water supply as well as in on other sectors where self-priming is required.

   

DESIGN  

Horizontal, radially split, self - priming ring-section pump with side chanel, single flow, single - flow,single - or multi-stage  

   

GAE SERO  

SRH  

Type :  

SRH228 SRH338 SRH448 SRH558  

SRH227 SRH337 SRH447 SRH557  

SRH226 SRH336 SRH446 SRH556  

SRH225 SRH335 SRH445 SRH555  

SRH224 SRH334 SRH444 SRH554  

SRH223 SRH333 SRH443 SRH553  

SRH222 SRH332 SRH442 SRH552  

SRH221 SRH331 SRH441 SRH551  

   

SOH  

Type :  

SOH228 SOH338 SOH448 SOH558  

SOH227 SOH337 SOH447 SOH557  

SOH226 SOH336 SOH446 SOH556  

SOH225 SOH335 SOH445 SOH555  

SOH224 SOH334 SOH444 SOH554  

SOH223 SOH333 SOH443 SOH553  

SOH222 SOH332 SOH442 SOH552  

SOH221 SOH331 SOH441 SOH551  

TRANSFER  PUMP :
Merk                  : TORISHIMA
Type                 : GAE SERO SON 222 WW
Cap.                  : 3 M3/ Hr
Head                 : 55 M
Power                : 2,2 KW/ 3 HP/ 380 V/ 3 Phase/ 4 Pole/ 1450 RPM     

JOCKEY  PUMP :
Merk                  : TORISHIMA
Type                 : GAE SERO SON 333 WW
Cap.                  : 5,7 M3/ Hr
Head                 : 60 M
Power                : 4 KW/ 5,5 HP/ 380 V/ 3 Phase/ 4 Pole/ 1450 RPM

CENTRIFUGAL  PUMP   :
Merk         : TORISHIMA
Type         : SOH 221
Cap.         : 3 m3/ h
Head         : 30 m
Power       : 1,5 HP/ 380 V/ 3 Phase/ 2 Pole/ 50 hz/ 1450 Rpm
 C/W Motor, Coupling, Base Plate

CENTRIFUGAL  PUMP   :
Merk         : TORISHIMA
Type         : SOH 221
Cap.         : 3 m3/ h
Head         : 30 m
Power       : 1,5 HP/ 380 V/ 3 Phase/ 2 Pole/ 50 hz/ 1450 Rpm
C/W Motor, Coupling, Base Plate


>>>>>>DOWNLOAD KATALOG SOH / SRH GAE SERO<<<<<<

>>>>>>DOWNLOAD KATALOG SON / SRN GAE SERO<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)