EBARA CMA-CMB-CMC-CMD-CMR Monobloc SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron

Ebara CM (A-B-C-D) CMR Centrifugal Pump

CM (A-B-C–D) Single Impeller Centrifugal Electric Pumps

Cast iron self-priming electric pumps.

APPLICATIONS
• Pressure boosting domestic plants
• Small-scale irrigation
• Moving non-aggressive liquids for civil and industrial use
• Washing plants
• Washing vehicles

TECHNICAL DETAILS
• Available with brass impeller (CMA 0.50 M GO, CMA 0.75 M GO, CMA 1.00 M GO)
• The CMR version is equipped with an open impeller
• They can be inserted into machinery for industrial use

PUMP TECHNICAL DATA
• Maximum working pressure: - 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC , CMD , CMR - 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50
• Maximum temperature of the liquid: - 40°C for CMA 0.50 - 0.75 - 1.00 - 90°C for the rest of the range
• G1 suction connection for CMA 0.50 - 0.75 - 1.00, G1¼ for CMA 1.50 - 2.00 - 3.00, G2 for CMB - CMC, G2½ for CMD
• G1 discharge connection for CMA, G1¼ for CMB, G1½ for CMR, G2 for CMC, G2½ for CMD MEI>0,4 (CMA-CMC), MEI>0,1 (CMB-CMD) For further information please see our Data Book

MOTOR TECHNICAL DATA
• High efficiency motors IE2 starting from 0,75kW
• Self-ventilated 2 pole asynchronous motor
• Class of insulation F
• IP44 Protection degree
• 230V ±10%, 50Hz single phase voltage, 230/400V ±10%, 50Hz three phase voltage
• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
• Protection under user's responsibility for the three phase version

MATERIALS
• Cast iron pump casing
• Mechanical seal in Carbon/Ceramic/NBR
• Impeller: - in PPE+PS reinforced with fibre glass for CMA 0.50 - 0.75 - 1.00 - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50, CMR 0.75-1.00 - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD
• Shaft: - in AISI 416 (integral) for CMA 0.50 - in AISI 303 (part in contact with the liquid) for CMA CMA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00, 1.50 - 2.00 - 3.00, CMC 0.75 - 1.00 CMD 1.50 - 2.00 - 3.00, CMR 0.75-1.00 - in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50, CMD 4.00
• Bracket: - in aluminum for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00, CMC 0.75 - 1.00, CMR 0.75-1.00 - in cast iron for the rest of the range

>>>DOWNLOAD KATALOG Ebara CM (A-B-C-D) CMR<<<<

>>>DOWNLOAD KATALOG EBARA MONOBLOCK<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA PRA-PRN PERIPHERAL ELECTRIC PUMPS

PRA-PRN
Peripheral
PERIPHERAL ELECTRIC PUMPS
in cast iron

APPLICATIONS
• Suitable for domestic uses
• residential / household
• Boilers power supply and booster units

TECHNICAL DETAILS
• They're silent
• Practical
• Easy to transport
• Available also in the nickel-plated version (PRN 0.50 model)

PUMP TECHNICAL DATA
• Maximum working pressure:
- 6 bar for PRA 0.50
- 7.5 bar for PRA 0.80
- 12 bar for the rest of the range
• Maximum temperature of the liquid: 80°C
• G1 discharge connection
• G1 suction connection

MOTOR TECHNICAL DATA
• High efficiency IE2 and IE3 motors starting from 0,75kW
• Asynchronous motor, 2 poles
• Class of insulation F
• IP44 Protection degree
• 230V±10%, 50Hz single phase voltage, 230/400V±10%, 50Hz three phase voltage
• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
• Protection under user's responsibility for the three phase version

MATERIALS
• Cast iron pump casing and bracket
• Shaft in AVZ Steel for the PRA 0.50 model,in AISI 303 (part in contact with the liquid) for the rest of the range
• Brass impeller
• Mechanical seal in Carbon/Ceramic/NBR

>>>DOWNLOAD KATALOG EBARA PRA / PRN<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA 3D, 3DS, 3DP Monobloc close coupled Centrifugal pumps

3D, 3DS, 3DP
Centrifugal pumps close coupled and standardized
Centrifugal pumps close coupled (3D) and standardized EN 733 (3DS-3DP) in cast iron.

Technical Detail:
Highly resistant construction
Impeller in stainless steel
High efficiency

Pump Technical Data:
Maximum working pressure: 10 bar
Temperature of the liquid:
-5°C ÷ +90°C
-5°C ÷ +110°C (H-HS-HW-HSW versions)
-5°C ÷ +120°C (E version)
MEI > 0,4
For further information please see our Data Book

Motor Technical Data:
High efficiency IE2 motors starting from 0,75kW to 5,5kW
High efficiency IE3 motors starting from 0,75kW (from 7,5kW for 3D4)
Self-ventilated 2 and 4 poles asynchronous motor
Insulation class F (B for high temperatures)
Protection degree IP 55
230V ±10% single phase voltage 50Hz,
230/400 ±10% (up to 4kW included) three phase 50Hz,
400/690V ±10% (from 5,5 kW and above) three phase 50Hz
Protection is user’s responsibility

Materials:
Pump casing in cast iron EN-GJL-250-EN 1561
Impeller in:
– AISI 304 for 3D(.) SERIES 32, 40, 50
– AISI 316 microcasted for 3D(.) SERIES 65
Shaft in AISI 304 (part in contact with the liquid)
Mechanical seal in:
– Ceramic/Carbon/NBR (standard)

Applications:
Water and clean liquids not chemically aggressive handling
Water supply
Pressure boosting
Washing and industrial plants
Water circulation in air-conditioning systems
Irrigation and agriculture

>>>DOWNLOAD KATALOG EBARA 3D<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA FSD / FSDA Mono block CLOSE COUPLE CENTRIFUGAL End Suction Volute Pump

FSD
Directly operated electric motor makes it compact.
All machine types have been equipped with a low-noise all enclosed fan cooler, making it possible to use both indoors and outdoors.
A patented analysis of the impeller and a an adapted casing has allowed for a great improvement of the motor's efficiency. It is also possible to seelect an output 1rank smaller than that of traditional machines.

Enhanced safety as a result of a installable protector on the exposed rotor

Close coupled end suction pumps
Applications:
Domestic and commercial water boosting for buildings,
Irrigation and general clean water transfer applications

Technical Data:
Flow : 2.4 to 66 mᶾ/hr
Head : 60 to 3 m
Motor : 0.25 to 11 kW
Speed : 2,900 rpm
Liq. temp: 0 to 80°C 3ph, 50 Hz
Construction Material:
Casing: Cast iron
Impeller: Bronze

Technical Details

Handled fluid		Clear water 0 ~ 100 ℃
Suction total head		-6m (20 ℃) (in selected view discharge weight range within)
Standard allowable pushing pressure		Please see the syllabus table.
Construction	Impeller	Closed
	Shaft seal	mechanical seal
	Bearing	sealed ball bearings (in the motor)
Flange		JIS 10K type (average) compliant goods
Material	Casing	CAST IRON
	Impeller	BRONZE except the model 32X32FS2F (304 STAINLESS STEEL)
	Main shaft	SUS304(wetted parts)
Motor	The number of phase-poles	three-phase, 2-pole
	Voltage	200V (50Hz) 200 / 220V (60Hz)
	Format	all enclosed fan-cooled ・ IP44(outdoor)
	Efficiency	IE3(Premium efficiency)
Location		Indoor and outdoor

>>>DOWNLOAD KATALOG EBARA FSD<<<<<

FSDA
Features
Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating elements can be removed without disconnecting suction and discharge pipe work.
Top centerline discharge, foot support under casing for maximum resistance due to misalignment and distortions from pipe loads.
Non-overload design to ensure stable performance for all applications.
Wider range application with flow capacity up to 12 m3/min.
Higher working pressure up to 16 bar.
Easy Confirm to JIS Standard JIS B8313 with 2 pole and 4 pole choice.
BPO (Back Pull Out) Type can be dissembled and inspected without removing the suction and discharge piping.

APPLICATIONS:
Water supply
Boosting pump system
High-rise building
Water circulation
Circulating of water in heating and cooling
Industrial use
Liquid transfer
Pumping clean water
Glycol for general water supply
HVAC systems in buildings and commercial complexes, fire-fighting, industries and irrigation

Technical Data:
Flow : 12 to 540 mᶾ/hr
Head : 65 to 5 m
Motor : 0.75 to 75 kW
Speed : 1,450 rpm
Liq. Temp: 0 to 100°C 3ph, 50 Hz
Construction material:
Casing: Cast iron
Impeller: Bronze




>>>DOWNLOAD KATALOG EBARA FSDA<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Ebara MD / MMD Series Centrifugal Pump MONOBLOCK CLOSE COUPLE

Ebara MD Series Centrifugal

Product Description

Ebara MD pumps are close coupled centrifugal pumps with extended shaft motors.

Particularly suited for applications including:

• Clean water for civil, agricultural, industrial use, pressure boosting units, heating and air conditioning plants
• Farming irrigation
• Sport centres
• Washing plants

PUMP SPECIFICATIONS
• Maximum temperature of the liquid:
 +90°C (MD),
 +110°C (MD version H-HS-HWHSW)
 +120°C (MD version E)
 +130°C (MMD)
• Maximum working pressure: 10 bar
• MEI > 0,1
 For further information please see our Data Book

MOTOR SPECIFICATIONS
• High efficiency motors IE2 starting from 0,75kW
• Self-ventilated 2 and 4 poles asynchronous motor
• Class of insulation F
• IP55 Protection degree
• 230V ±10%, 50Hz single phase voltage,
 three phase voltage, 230/400V ±10% 50Hz up to 4 kW included,
 three phase voltage, 400/690V ± 10% from 5.5 kW and over
• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
• Protection for the three phase versions to be supplied by the installer/end user.

>>>DOWNLOAD KATALOG EBARA MD<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)