CNPA
Horizontal Split Case Fire Fighting Pump ( UL/FM List) Compliance to NFPA 20
Non Overload design to ensure stable performance for all applications
Corrosion resistant materials used on the rotating parts
Hydraulically balanced impeller extends bearing life and assures smoother operation
Fully compliance to NFPA-20 and listed by Underwriters Laboratories (UL)
Horizontal Split Case Pumps **)
Very compact design for easy of installation and permits minimum maintenance.
xially split casing allows the easy removal of the top casing for inspection and service.
Available in horizontal or vertical configuration.
Available in clockwise or counter clockwise rotation to simplify pump room layout.
Flow rate capacity 500 up to 1250 USGPM.
Working pressure up to 250 psi with 250 lb. ANSI Flanges.
**) UL File Number “EX15584”
UL / FM approved horizontal split case pump for fire fighting
Flow : 500 to 1,250 usgpm
Head : upto 137 psi
Motor : upto 150 hp
Speed : 2,900 rpm
Liq. Temp : 0 to 80°C
Construction :
Casing : Ductile cast iron
Impeller : Bronze
EBARA CNPA Horizontal Split Case Pump Fire Pump
Type : 65 CNPA |
| Flow rate : 1250 USGPM (284 m3/h) |
| Head : 110 Psi /758 kPa |
| Power : 127 Hp |
Speed : 2900 rpm
EBARA CNPA Horizontal Split Case Pump Fire Pump
|
| Type : 65 CNPA |
| Flow rate : 1000 USGPM (227 m3/h) |
| Head : 142 Psi /979 kPa |
| Power : 145 Hp |
Speed : 2900 rpm
EBARA CNPA Horizontal Split Case Pump Fire Pump
|
| Type : 65 CNPA |
| Flow rate : 750 USGPM (170 m3/h) |
| Head : 97 Psi /669 kPa |
| Power : 81 Hp |
Speed : 2900 rpm
| EBARA CNPA Horizontal Split Case Pump Fire Pump |
| Type : 54 CNPA |
| Flow rate : 500 USGPM (113 m3/h) |
| Head : 81 Psi /558 kPa |
| Power : 42 Hp |
Speed : 2900 rpm
FSPA
End Suction Fire Fighting Pump ( UL/FM List) Compliance to NFPA 20
Non Overload design to ensure stable performance for all applications
Corrosion resistant materials used on the rotating parts
Hydraulically balanced impeller extends bearing life and assures smoother operation
Fully compliance to NFPA-20 and listed by Underwriters Laboratories (UL)
End Suction Pumps *)
Easy removal and maintenance, BPO (Back Pull Out) system allows all rotating elements to be removed without disconnecting suction and discharge pipe work.\
Top centreline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.
Flow rate capacity 250 up to 750 USGPM.
Working pressure up to 250 psi with 250 lb. ANSI Flanges.
*) UL File Number “ EX15585 ”
Material
Casing Ductile cast iron (FCD450) for FSA model; Cast iron (FC250) for CNPA model, Impeller bronze casting (CAC406), Shaft Stainless steel (SUS316), Shaft sleeve Bronze casting (CAC406), Gland packing Teflon (PTFE) impregnated.
UL / FM approved end suction pump for fire fighting
Flow : 250 to 750 usgpm
Head : upto 175 psi
Motor : upto 125 hp
Speed : 2,900 rpm
Liq. Temp : 0 to 80°C
Construction :
Casing : Ductile cast iron
Impeller : Bronze
EBARA CNPA Centrifugal End Suction Pump Fire Pump
| Type : 54 FSPA |
| Flow rate : 500 USGPM (113 m3/h) |
| Head : 74 Psi /510 kPa |
| Power : 49 Hp |
Speed : 2900 rpm
EBARA CNPA Centrifugal End Suction Pump Fire Pump
Type : 43 FSPA |
| Flow rate : 300 USGPM (68 m3/h) |
| Head : 85 Psi /586 kPa |
| Power : 27 Hp |
Speed : 2900 rpm
| Fire Fighting Pump EBARA |
| Model FSPA Centrifugal |
| End Suction Pump |
| Type : 43 FSPA |
| Flow rate : 250 USGPM (57 m3/h) |
| Head : 87 Psi /600 kPa |
| Power : 25 Hp |
| Speed : 2900 rpm |
|
|
|
|
|
|
>>>>
DOWNLOAD KATALOG EBARA FSPA / CNPA<<<<<<
Untuk informasi lebih lanjut bisa menghubungi kami di:
