CPEN
END SUCTION PUMPS > CPEN
END SUCTION PUMPS > CPEN
STAINLESS STEEL PUMPS
CPEN is a new model of
Stainless Steel Semi - process Pump with stable pump performance, high
efficiency and low NPSH required. Compact high efficiency for economical
energy-saving design.
FEATURES
1. Back pull out design
2. High precision casting, high efficiency closed type impeller
3. Single mechanical seal used as standard type with SiC material
4. Stainless steel material only for wet part (low cost pump)
5. High temperature operational (optional)
6. Greased filled sealed ball bearing in bearing housing
7. The shaft is protected by replaceable sleeve
1. Back pull out design
2. High precision casting, high efficiency closed type impeller
3. Single mechanical seal used as standard type with SiC material
4. Stainless steel material only for wet part (low cost pump)
5. High temperature operational (optional)
6. Greased filled sealed ball bearing in bearing housing
7. The shaft is protected by replaceable sleeve
TECHNICAL DATA
Total Head H up to 88 m
Capacity Q up to 240 m3/hr (4 m3/min)
Size DN 40 to 200 mm
Temperature T - 10 up to 70 Degree Celsius (standard), - 15 up to 140 Degree Celsius (optional)
Total Head H up to 88 m
Capacity Q up to 240 m3/hr (4 m3/min)
Size DN 40 to 200 mm
Temperature T - 10 up to 70 Degree Celsius (standard), - 15 up to 140 Degree Celsius (optional)
BENEFITS
1. Easy maintenance (quick repair work)
2. High efficiency, highly stable characteristics
3. Low NPSH required
4. Flexible application
1. Easy maintenance (quick repair work)
2. High efficiency, highly stable characteristics
3. Low NPSH required
4. Flexible application
APPLICATIONS
Clean Water, Hot Water, Pure Water, Brine, Sea Water, Alkaline Water, Acid Liquid, Solvent, Oil, Caustic Soda, etc.
Clean Water, Hot Water, Pure Water, Brine, Sea Water, Alkaline Water, Acid Liquid, Solvent, Oil, Caustic Soda, etc.
Stainless steel pumps of process type (Back
pull-out construction). Standard shaft seal type is mechanical seal. No cooling is required up to the temperature +140 deg.C. | ||||||||
General specifications ranges
For special requirements, including handing of heat
transfer oils, the CER pumps are available in various constructions and materials. Please contact us |
Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)
