EBARA CMA-CMB-CMC-CMD-CMR Monobloc SINGLE IMPELLER CENTRIFUGAL ELECTRIC PUMPS in cast iron

Ebara CM (A-B-C-D) CMR Centrifugal Pump

CM (A-B-C–D) Single Impeller Centrifugal Electric Pumps

Cast iron self-priming electric pumps.

APPLICATIONS
• Pressure boosting domestic plants
• Small-scale irrigation
• Moving non-aggressive liquids for civil and industrial use
• Washing plants
• Washing vehicles

TECHNICAL DETAILS
• Available with brass impeller (CMA 0.50 M GO, CMA 0.75 M GO, CMA 1.00 M GO)
• The CMR version is equipped with an open impeller
• They can be inserted into machinery for industrial use

PUMP TECHNICAL DATA
• Maximum working pressure: - 6 bar for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMC , CMD , CMR - 8 bar for CMA 1.50 - 2.00 - 3.00, CMB 4.00 - 5.50
• Maximum temperature of the liquid: - 40°C for CMA 0.50 - 0.75 - 1.00 - 90°C for the rest of the range
• G1 suction connection for CMA 0.50 - 0.75 - 1.00, G1¼ for CMA 1.50 - 2.00 - 3.00, G2 for CMB - CMC, G2½ for CMD
• G1 discharge connection for CMA, G1¼ for CMB, G1½ for CMR, G2 for CMC, G2½ for CMD MEI>0,4 (CMA-CMC), MEI>0,1 (CMB-CMD) For further information please see our Data Book

MOTOR TECHNICAL DATA
• High efficiency motors IE2 starting from 0,75kW
• Self-ventilated 2 pole asynchronous motor
• Class of insulation F
• IP44 Protection degree
• 230V ±10%, 50Hz single phase voltage, 230/400V ±10%, 50Hz three phase voltage
• Permanent capacitor inserted and thermo-amperometric protection with automatic rearm incorporated for the single phase motor
• Protection under user's responsibility for the three phase version

MATERIALS
• Cast iron pump casing
• Mechanical seal in Carbon/Ceramic/NBR
• Impeller: - in PPE+PS reinforced with fibre glass for CMA 0.50 - 0.75 - 1.00 - in brass for CMA 1.50 - 2.00 - 3.00, CMB 2.00 - 3.00 - 4.00 - 5.50, CMR 0.75-1.00 - in cast iron for CMB 0.75 - 1.00 - 1.50, CMC, CMD
• Shaft: - in AISI 416 (integral) for CMA 0.50 - in AISI 303 (part in contact with the liquid) for CMA CMA 0.75 - 1.00 - 1.50 - 2.00 - 3.00, CMB 0.75 - 1.00, 1.50 - 2.00 - 3.00, CMC 0.75 - 1.00 CMD 1.50 - 2.00 - 3.00, CMR 0.75-1.00 - in AISI 304 (part in contact with the liquid) for CMB 4.00 - 5.50, CMD 4.00
• Bracket: - in aluminum for CMA 0.50 - 0.75 - 1.00, CMB 0.75 - 1.00, CMC 0.75 - 1.00, CMR 0.75-1.00 - in cast iron for the rest of the range

>>>DOWNLOAD KATALOG Ebara CM (A-B-C-D) CMR<<<<

>>>DOWNLOAD KATALOG EBARA MONOBLOCK<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA IFS ISO2858 PROCESS PUMP Single Stage Centrifugal End Suction (Semi Open Impeller)

IFS
PROCESS PUMP
Single Stage,
End Suction, Foot Suppot, horizontal type
have been widely used in chemical industry
Single Suction Volute, ISO2858 (Semi Open Impeller)

Applications :
Chemical industry
Petroleum refineries
The petrochemical Industry
Other industries

Features :
Foot support and heavy duty design
Back pull-out casing
Full compliance with ISO 2858 specifications
All components have been designed for maximum parts interchangeability
Flexibility of design handles wide range of liquids
All size stocked for fast shipment
Low NPSH performance.

Foot support, Radial split

Single or Double Volute casing

Open impeller

Full compliance with ISO 2858

Back Pull Out design

Center top discharge (Self−venting)

Max. Parts Interchangeability

Rating :

Capacity up to 720 m3/h (3200 U.S.gpm)

Head up to 135 m (450 ft)

Temperature －50℃～＋200℃ (－60℉～＋390℉)

Flange Rating up to ASME Class 150 Ib Others are also available

>>>>DOWNLOAD KATALOG EBARA IFS<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

PRODUCT RANGE EBARA

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA 6”- 8” 6-8 BHE / BHEL Borehole Deepwell Submersible Pump

6-8 BHE(L)
Borehole
6” -8" submersible centrifugal pump
6”- 8” Bore hole Pump for Deep Well

Features
6”- 8” Submersed Centrifugal electric pumps for deep well in AISI 304 (6BHE) and AISI 316 (6BHEL) stainless steel.

High resistance to corrosion
Reliable
Compact
Also suitable for horizontal functioning

6" submersible pump, stainless steel AISI 316 AISI 304 (6BHE) and (6BHEL), for deep wells.
Discharge casing, impeller, stages, support and diffuser are in AISI 304 or AISI 316 depending on the model. The shaft is in AISI 431 for 6BHE and AISI 316 + AISI 329 for 6BHEL.
They can be used for water supply from deep wells, for water distribution and pressurisation,
irrigation systems, water treatment, filtering and reverse osmosis, industrial cooling systems,
fountains and fire-fighting systems.

PUMP TECHNICAL DATA
• Total head from 8.2 to 700 m
• Capacity from from 6 to 80 m3/h
• Maximum immersion: 350 m (water filled motor) 150 m
(oil filled motor)
• Maximum liquid temperature 60°C
• Maximum sand content 100 gr/m3
• MEI > 0.4 (for all models except 6BHE (L) 13)




Applications:
Water provisioning from deep wells
Water supply and pressure boosting
Irrigation systems
Treating waters, filtering and reverse osmosis
Industrial cooling systems
Fountains and fire-fighting plants

>>>DOWNLOAD KATALOG EBARA 6-8 BHE<<<

>>>DOWNLOAD KATALOG EBARA BHS<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA BEST 2-3-4-5 Stainless Strainer Submersible Sump Pump

BEST 2-3-4-5

Submersible pumps in stainless steel 304
BEST 2-3-4-5
Submersible pump with suction strainer

Features
Submersible pump in AISI 304 Stainless Steel
Versatile
They can be used in fixed or mobile installations
Equipped with 10 m of H07 RN-F power supply cable
Available with or without float
Pump casing, impeller, strainer, cover, casing cover and motor casing in AISI 304
Shaft in AISI 303
Double mechanical seal with interposed oil chamber upper in carbon/ceramic/NBR lower in SiC/SiC/NBR

Applications:
Moving seepage water
Draining cellars, garages and basements
Draining small to medium cellars
Draining wells
Plant room sump
Lift shaft emptying
Pools
Sumps
Irrigation
Water displays

Pump Data:
Maximum immersion 7m for pumps with 10 m cable
Maximum temperature of the liquid: 35°C
Max. solids size for passage: 10 mm
G1½ Discharge connection

Motor Data:
Self-ventilated 2 pole asynchronous motor
Class of insulation F
IP68 Protection degree
230V ±10%, 50Hz single phase voltage,
400 ±10%, 50Hz three phase voltage
Permanent capacitor inserted and
thermo-amperometric protection with automatic rearm incorporated
for the single phase motor
Protection under user’s responsibility for the three phase version


Material Data:
Pump casing, impeller, suction grill, motor cover, seal housing disc and
motor case in AISI 304
Shaft in AISI 303 (part in contact with the liquid)
Twin mechanical seal with oil chamber:
– upper in Carbon/Ceramic/NBR (motor side)
– lower in SiC/SiC/NBR (pump side)

>>>>DOWNLOAD KATALOG EBARA BEST 2-5<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA 3” SB3 BOREHOLE SUBMERSIBLE MULTISTAGE PUMPS (POMPA SUMUR)

SB3

3” BORE-HOLE PUMPS

3” BOREHOLE PUMPS SUITABLE FOR HANDLING CLEAR WATER IN WELLS, CLEAN WATER BOOSTING FOR AGRICULTURAL,

DOMESTIC OR INDUSTRIAL USE, IRRIGATION AND HANDLING WATER IN GENERAL.

Borehole

SB3

Borehole

Casing, discharge casing and motor joint are in AISI 304. Polyacetal resin POM diffuser. Impeller in PPO, glass fibre reinforced polymer.

Especially recommended for the movement of clear water in wells, the pressurisation of clean water for agricultural use, industrial use and for the irrigation and pumping of water in general.

TECHNICAL DATA

• Total head from 9.8 to 122 m

• Capacity from 0.6 to 2.7 m3/h

• Maximum immersion 60 m

• Maximum liquid temperature 30°C

• Maximum sand content 50 ppm

SPECIFICATION

• Max. immersion : 60m

• Max. temperature : 30°C

MATERIAL

• Jacket, delivery port, motor connection in AISI 304

• Diffusers in polyacetals

• Impeller in PPO mod. glass fi bre reinforced

TECHNICAL DATA

• Insulation : Class F

• Protection degree : IP 58

• 1 ~ 230V (+6 -10%) 50Hz, 3 ~ 400 (+6 -10%) 50Hz

• Permanent split capacitor and automatic thermal overload protection for single-phase version

• Thermal protection to be provided by the user for three-phase version

• Discharge 1”

TECHNICAL DATA

• Total head from 9.8 to 122 m

• Capacity from 0.6 to 2.7 m3/h

• Maximum immersion 60 m

• Maximum liquid temperature 30°C

• Maximum sand content 50 ppm

>>>>DOWNLOAD KATALOG EBARA SB3<<<<

>>>DOWNLOAD KATALOG EBARA BHS<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA BMS & BMSP Submersible Pump For Water Pit

Model BMS
Product Description
①Optimized hydraulic design saves energy consumption.
②Installation space is minimized and pump runs with low noise as the pump is submerged.
③Pump permits to drain close to bottom of the pit as suction inlet designs lower portion.

Applications :
Water supply
Transfer Pump
Irrigation

Features :
Energy conservation
Use for portable water supply
Space conservation
Low noise
Automatic operation
Possible to operate at low-water levels

Technical Details

■Specifications

Liquid Handled			Fresh water
Liquid temperature			0 ～ 40℃(Up to 15kW) 0 ～ 32℃(18.5kW and over)
Contained sand limit			Up to 50mg/L
Contained chlorine limit			Up to 200mg/L
Max. pump submergence			10m
Construction	Impeller		Enclosed
Materials	Casing		Cast iron
	Impeller		Bronze
	Shaft		420J2 Stainless Steel
Motor	Type		Water filled submersible motor, 2 pole
			Canned type Water tight type : 18.5kW and over
	Starting		D.O.L. starting : Up to 7.5kW Star deita starting : 11kW and over
	Construction	Shaft seal	Oil seal
		Shaft	Shaft joint type
	Materials	Frame	304 Stainless Steel
		Shaft	420J2 Stainless Steel
		Cable	2PNCT
Flange			JIS 10K thin type JIS 10K normal type

Model BMSP
Product Description
①Pump complies with the water supply law in Japan as wetted surface is made by stainless steel.
②Optimized hydraulic design saves energy consumption.
③Installation space is minimized and pump runs with low noise as the pump is submerged.
④Water contamination is prevented by use of a water-tight type motor.
⑤Pump permits to drain close to bottom of the pit as suction inlet designs lower portion.
⑥Pump is allowed to install at the underground pit due to light-weight. Optional horizontal installation model is available for below 65 mm discharge model.

Technical Details

■Specifications

Liquid Handled			Fresh water
Liquid temperature			0 ～ 40℃
Contained sand limit			Up to 50mg/L
Contained chlorine limit			Up to 200mg/L
Max. pump submergence			10m
Construction	Impeller		Enclosed
Materials	Casing		304 Stainless Steel
	Impeller		304 Stainless Steel, Bronze(100mm discharge)
	Shaft		431 Stainless Steel 316 Stainless Steel (80mm dischaege) 403 Stainless Steel (100mm descharge)
Motor	Type		Water filled submersible motor, 2 pole
			Canned type
	Starting		D.O.L. starting : Up to 7.5kW Star deita starting : 11kW and over
	Construction	Shaft seal	Oil seal
		Shaft	Mono block type
	Materials	Frame	304 Stainless Steel
		Shaft	431 Stainless Steel
		Cable	2PNCT
Flange			Special flange(below 65mm descharge), JIS 10K normal type

>>>>>DOWNLOAD KATALOG EBARA BMS & BMSP<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA MSS / MSSH HORIZONTAL MULTI STAGE RING SECTION CASING DIFFUSER TYPE FOR HIGH PRESSURE SERVICE

Product Description
(1) The specially designed impeller of the first stage achieves low NPSHR to prevent cavitation.
(2) The thrust of all shafts is completely balanced by the balance disk.
Foot support, Ring section
Multistage, Diffuser type casing
Tandem impeller arrangement
MSS/MSSH Ring Section Pumps MSS/MSSH series pumps are horizontal ,single casing, ring section, multistage structure. With simplified construction, MSS/MSSH can be highly efficient and reliable. Applications Boiler feed Processing water supply City high pressure water supply Ratings Flow (Q): to 324 m3/h Maximum allowable operation pressure : to 5.74MPa.  Maximum allowable suction pressure: 2.45MPa. Temperature range: to 165℃

Technical Details

■Standard Specifications

Liquid		Water/Boiler feed water(0～165℃)
Suction requirment		Positive suction pressure or boost
Max.Allowable suction pressure		2.45MPa
Construction	Impeller	Enclosed
	Shaft seal	Gland packing
	Bearing	Coupling side：Roller bearing(Oil bath)
		Opposite coupling side：Ball bearing(Oil bath)
Flange	Suction side	JIS10K FF
	Discharge side	JIS20K RF、30K RF、40K RF
Materials		Standard type		Stainless type
	Suction casing	FCD540-3K		SCS13
	Intermediate casing	FCD540-3K/SCPH21		SCS13
	Discharge casing	SCPH21		SCS13
	Impeller	FCD540-3K		SCS13
	Shaft	SCM435		SUS630
	Shaft sleeve	SUS420J2		SUS304
Nozzle direction		*1

*1. Nozzle direction

Bore size (mm)	50X40～100X80	125X100、150X125
Suction	TOP	SIDE
Discharge	TOP	TOP

Capacity upto 324 m3/h (1430 U.S.gpm)

Head upto 810 m (2660 ft)

Temperature upto 165℃ (329℉)

Flange Rating upto ASME Class 600 Ib

Others are also available

Applications:

Boiler Feed

Processing Water

Other Industries

>>>>DOWNLOAD KATALOG EBARA MSS / MSSH<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA DIESEL PERTANIAN / IRIGASI SAWAH

Irigasi , Tambak udang dan pengendalian banjir 

Untuk pemakaian irigasi , tambak udang dan pengendalian banjir dipakai pompa diesel.

Pertanian dan Irigasi

Untuk aplikasi Pertanian dan irigasi dipakai pompa diesel 

Material:

berbahan besi cor, lebih tahan terhadap karat

Kipas/Impeller berbahan perunggu

Kipas berbahan perunggu, lebih tahan terhadap karat dan kerusakan akibat benturan dari kotoran yang ada di air

Poros/shaft berbahan baja karbon dan baja tahan karat 

Dengan pemakaian poros berbahan baja, menjadikan poros tidak mudah patah akibat momen puntir yang ada

Bantalan bola tertutup/Sealed Ball Bearing

Bantalan bola tertutup lebih tahan lama, kotoran sulit untuk masuk kedalam bantalan

Pemasangan pompa dengan sistem knockdown

Pemasangan pompa dengan sistem knock down, menjadikan perawatan dan perbaikan menjadi lebih mudah dikarenakan bisa dilepas bagian per bagian

Perlengkapan Standar

Saringan, elbow buang, klep selang , nipple selang hisap, ranga baja, penutup pulley, V-pulley, V-Belt, selang buang vinil 10 m dan selang hisap spiral 6 m

Model		SQ50TF55	SQ80TF65	SQ100TF85
Jenis		-
Dimensi	Panjang [mm]	915	975	1085
	Lebar [mm]	480	590	680
	Tinggi [mm]	450	575	685
Berat [kg]		105	120	164
Pompa	Tipe	self priming	self priming	self priming
	Diameter [inch]	2	3	4
	Kapasitas [L/mnt]	460	1200	1800
	kecepatan putaran pompa [rpm]	2800	2200	2000
	Daya hisap [m]	7	6	6
	Tinggi hantaran pompa [m]	18	11	10
Motor penggerak	Model	TF55	TF70	TF85
	Volume langkah [cc]	353	382	493
	sistem pembakaran	Injeksi langsung	Injeksi langsung	Injeksi langsung
	Daya kontinyu [hp/rpm]	4.5/2200	5.5/2200	7.5/2200
	Daya maksimum [hp/rpm]	5.5/2200	6.5/2200	8.5/2200
	sistem pendinginan	Hopper	Hopper	Hopper
	kapasitas tangki bahan bakar [L]	7.1	7.1	10.5
	Kapasitas minyak pelumas [L]	1.8	1.8	2.2
	kapasitas air pendingin [L]	8	8	8.9
	Sistem penyalaan	Manual (engkol)	Manual (engkol)	Manual (engkol)
Aksesoris	Saringan	ok	ok	ok
	Elbow saluran buang	ok	ok	ok
	Klem selang	ok	ok	ok
	Nipple selang hisap	ok	ok	ok
	Rangka plat baja	ok	ok	ok
	penutup pulley	ok	ok	ok
	v-pulley	ok	ok	ok
	v-belt	ok	ok	ok
	selang buang vinyl	ok	ok	ok
	selang hisap spiral	ok	ok	ok
	Foot valve	-	-	-
	Fleng penyambung	-	-	-
Model		SQ150TF115M	SQ150TF155	SZ200TS230
Jenis		-
Dimensi	Panjang [mm]	1195	1279	1470
	Lebar [mm]	955	987	815
	Tinggi [mm]	950	950	846
Berat [kg]		275	310	403
Pompa	Tipe	self priming	self priming	Horizontal
	Diameter [inch]	6                                   6		8
	Kapasitas [L/mnt]	2800	3400	6500
	kecepatan putaran pompa [rpm]	1600	1750	1750
	Daya hisap [m]	5.5	6	6
	Tinggi hantaran pompa [m]	9.5	9	8.5
Motor penggerak	Model	TF115M	TF155	TF230
	Volume langkah [cc]	638	857	1132
	sistem pembakaran	Injeksi langsung	Injeksi langsung	Injeksi langsung
	Daya kontinyu [hp/rpm]	10.5/2400	14.5/2400	19/2200
	Daya maksimum [hp/rpm]	11.5/2400	15.5/2400	23/2200
	sistem pendinginan	Hopper	Hopper	Hopper
	kapasitas tangki bahan bakar [L]	11	14.3	21.5
	Kapasitas minyak pelumas [L]	2.8	3	6
	kapasitas air pendingin [L]	12	13	22.8
	Sistem penyalaan	Manual (engkol)	Manual (engkol)	Manual (engkol)
Aksesoris	Saringan	ok	ok	ok
	Elbow saluran buang	ok	ok	ok
	Klem selang	ok	ok	ok
	Nipple selang hisap	ok	ok	ok
	Rangka plat baja	ok	ok	ok
	penutup pulley	ok	ok	ok
	v-pulley	ok	ok	ok
	v-belt	ok	ok	ok
	selang buang vinyl	ok	ok	ok
	selang hisap spiral	ok	ok	ok
	Foot valve	-	-	ok
	Fleng penyambung	-	-	ok

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)