PRODUCT RANGE EBARA

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA BMS & BMSP Submersible Pump For Water Pit

Model BMS
Product Description
①Optimized hydraulic design saves energy consumption.
②Installation space is minimized and pump runs with low noise as the pump is submerged.
③Pump permits to drain close to bottom of the pit as suction inlet designs lower portion.

Applications :
Water supply
Transfer Pump
Irrigation

Features :
Energy conservation
Use for portable water supply
Space conservation
Low noise
Automatic operation
Possible to operate at low-water levels

Technical Details

■Specifications

Liquid Handled			Fresh water
Liquid temperature			0 ～ 40℃(Up to 15kW) 0 ～ 32℃(18.5kW and over)
Contained sand limit			Up to 50mg/L
Contained chlorine limit			Up to 200mg/L
Max. pump submergence			10m
Construction	Impeller		Enclosed
Materials	Casing		Cast iron
	Impeller		Bronze
	Shaft		420J2 Stainless Steel
Motor	Type		Water filled submersible motor, 2 pole
			Canned type Water tight type : 18.5kW and over
	Starting		D.O.L. starting : Up to 7.5kW Star deita starting : 11kW and over
	Construction	Shaft seal	Oil seal
		Shaft	Shaft joint type
	Materials	Frame	304 Stainless Steel
		Shaft	420J2 Stainless Steel
		Cable	2PNCT
Flange			JIS 10K thin type JIS 10K normal type

Model BMSP
Product Description
①Pump complies with the water supply law in Japan as wetted surface is made by stainless steel.
②Optimized hydraulic design saves energy consumption.
③Installation space is minimized and pump runs with low noise as the pump is submerged.
④Water contamination is prevented by use of a water-tight type motor.
⑤Pump permits to drain close to bottom of the pit as suction inlet designs lower portion.
⑥Pump is allowed to install at the underground pit due to light-weight. Optional horizontal installation model is available for below 65 mm discharge model.

Technical Details

■Specifications

Liquid Handled			Fresh water
Liquid temperature			0 ～ 40℃
Contained sand limit			Up to 50mg/L
Contained chlorine limit			Up to 200mg/L
Max. pump submergence			10m
Construction	Impeller		Enclosed
Materials	Casing		304 Stainless Steel
	Impeller		304 Stainless Steel, Bronze(100mm discharge)
	Shaft		431 Stainless Steel 316 Stainless Steel (80mm dischaege) 403 Stainless Steel (100mm descharge)
Motor	Type		Water filled submersible motor, 2 pole
			Canned type
	Starting		D.O.L. starting : Up to 7.5kW Star deita starting : 11kW and over
	Construction	Shaft seal	Oil seal
		Shaft	Mono block type
	Materials	Frame	304 Stainless Steel
		Shaft	431 Stainless Steel
		Cable	2PNCT
Flange			Special flange(below 65mm descharge), JIS 10K normal type

>>>>>DOWNLOAD KATALOG EBARA BMS & BMSP<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Ebara FS / FSA Series Centrifugal End Suction Pump

 Pompa Ebara FSA Series Centrifugal End Suction Pump

Pompa Ebara FSA

Pompa Ebara dengan Type FSA atau FS adalah Pompa Centrifugal yang bisa dikopel dengan motor

Kelebihan dari Pompa Ebara FS atau FSA adalah :

- Perawatan dan pemeliharaan pompa yang mudah, murah dan luar biasa gampang dengan kemampuan BPO pengambilan pelepasan pompa dengan gampang tanpa harus melepaskan atau membuka dahulu bagian pipa hisap dan pipa pembuangan

- Bagian Pembuangan yang mengunci dan pembantu kaki di bawah badan pompa yang sangat pas, erat sehingga menghindari distorsi gerak ataupun kesalahan ketidak pas dalam pemasangan Pipa-pipa

- Desain dan Bentuk yang sangat efisien dan tidak kebesaran memudahkan teknisi dalam pemasangan atau pelepasan pompa

- Aplikasi transfer air yang memiliki kemampuan yang cukup luas, mulai jarak kecil dan jarak besar hingga ke kapasitas besar seperti 22 m3/min hingga 50 m3/min

- Pompa Ebara FS dan FSA memiliki kemampuan untuk mendorong hingga tekanan 16 Bar atau 160 Meter


Aplikasi kegunaan dari Pompa Ebara FS atau FSA adalah :

- Air bersih transfer, menyalurkan air bersih

- Irigasi

- Transfer air pada Gedung Pabrik dan Gedung tinggi di perkotaan

- Sirkulasi air panas dan air dingin

- Pendingin mesin cooling pada kapal

- Boiler di pabrik-pabrik

- Kolam renang

- Penggunaan industri-industri

- Perkebunan untuk percikan air di segala titik

- Pompa untuk KEBAKARAN


Material atau Bahan baku dalam Pompa Ebara FS dan FSA :

-  Casing Cast Iron, optional Ductile Cast Iron (FCD) adalah Besi Coran yang sangat handal kuat tahan pada air , air yang mengandung sedikit asam dan asin

-  Impeller : Bronze casting (CAC406/BC6), optional Cast Iron, Ductile Cast Iron (FCD) adalah tahan kepada air asin karena terbuat dari bahan kuningan yang tahan pada air laut dan air asin.

- Shaft : 403 Stainless Steel, optional 304;316 Stainless steel = adalah tahan kepada air asin karena terbuat dari bahan kuningan yang tahan pada air laut dan air asin, air asam. Sungguh kuat

-  Seal : Mechanical seal :ceramic/carbon/NBR, optional Gland Packing : Teflon (PTFE) impregnate; Mechanical seal : SiC/SiC.

CENTRIFUGAL END SUCTION PUMP EBARA FS

Features

-  Easy maintenance, BPO (Back Pull Out) feature allows all rotating elements to be removed without disconnecting suction and discharge pipework.

-  Top centreline discharge, foot support under casing for maximum resistance to misalignment and distortion from pipe loads.

-  Non overload design to ensure stable performance for all applications.

-  Wide range application with flow capacity up to 22m3/min for 50.

-  Higher working pressure up to 16 Bar.

Easy Confirm to JIS Standard JIS B8313with 2pole and 4pole choice.

BPO (Back Pull Out) Type can be dissembled and inspected without removing the suction and discharge piping.

Applications

-  Water supply

-  Hot and cold water circulation

-  Industrial use

-  Sprinkling

-  Air-conditioning

-  For swimming pool

Material

-  Casing Cast Iron, optional Ductile Cast Iron (FCD).

-  Impeller : Bronze casting (CAC406/BC6), optional Cast Iron, Ductile Cast Iron (FCD).

- Shaft : 403 Stainless Steel, optional 304;316 Stainless steel.

-  Seal : Mechanical seal :ceramic/carbon/NBR, optional Gland Packing : Teflon (PTFE) impregnate; Mechanical seal : SiC/SiC.

>>>DOWNLOAD KATALOG EBARA FSA<<<<

>>>DOWNLOAD KATALOG EBARA IBL / FS / FSD <<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA IBL / FS / FSD Long coupled Centrifugal end suction pump

IBL
PRODUCT DESCRIPTION:

- Back Pull Out type . can be disassembled and inspected without removing the suction/discharge piping of the thermal insulation materials.

- High efficiency across a wide range of capacity.

- Can be used for suction pressure up to 7kgf/cm2.

- Quiet operation.

- Conforms to Japanese Machinery Standard (JIMS) and International Standard (ISO 2858).

Applications:
Pumping clean water for HVAC systems in buildings and commercial complexes, fire-fighting, industries, water treatment plants, irrigation and general water transfer

Technical Details

		Standard	Optional
Liquid		Fresh water 0 ~ 80°C
Max. suction pressure		0.4MPa (4kgf/cm2)	0.41~0.7MPa (4.1 ~ 7.1kgf/cm2)
Max. working pressure		1.37MPa (14kgf/cm2)
Construction	Impeller Shaft steal Bearing	Enclosed Glank packing Sealed ball bearing (Oil-bath)	Self flushing (negative suction) External flushing (81 ~ 110°C) Casing with drain valve
Flange		JIS 10K normal type FF
Materials	Casing Impeller Shaft Shaft sleeve	FC250 FC200 or FC400 S35C or SCM440 SUS420J1	Impeller: CAC406 (FC200 model) or SCS13 (FC400 model) Shaft: SUS420J1 or SUS304 Shaft sleeve: SUS304
Motor		Three phase, 2 pole or 4 pole (For the available voltage, please refer to the attached “Voltage list”) TEFC Indoor type : 0.4-55kW ODP type : 72-250kW	TEFC Outdoor type
Location		Indoor
Other			Special common base

Technical Data:
Flow : 6 to 150 mᶾ/hr
Head : 90 to 15 m
Motor : 1.5 to 45 kW
Speed : 2,900 rpm
Liq. Temp : 0 to 80°C
3ph, 50 Hz
Flow : 6 to 600 mᶾ/hr
Head : 90 to 5 m
Motor : 0.4 to 200 kW
Speed : 1,450 rpm

Material:
Casing : Cast iron
Impeller : Cast iron

>>>DOWNLOAD KATALOG EBARA IBL / FS / FSD <<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

EBARA DML Submersible pumps single channel impeller handling in cast iron

DML Submersible Sewage Pump (Single Channel Impeller)
DML Submersible sewage pump with single channel impeller handling upto 76 mm solids

Applications:
Pumping sewage, waste water and drain water containing solids and fibers.

• Sewage
• Waste water

Features

• Non-clog single channel impeller
• Permit minimum 3” solid passage
• Dry pit is available as optional

Technical Data:
Flow : 12 to 300 mᶾ/hr
Head : 38 to 5 m
Motor : 2.2 to 22 kW
Speed : 1,450 rpm
Liq. Temp : 0 to 40°C 3ph, 50 Hz
DML Submersible pumps material:
Casing : Cast iron
Impeller : Cast iron


>>>DOWNLOAD KATALOG EBARA DML<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

SUBMERSIBLE PUMP EBARA DS / DSA / DSJ

SUBMERSIBLE   PUMP  :
Merk  : EBARA
Type   : 50 DS 0,75
Cap.   : 0,1 m3/ m
Pressure  : 15 m
Power  : 0,75 KW/ 1 HP/ 380 V/ 50 HZ/ 2 Pole/ 2950 Rpm               
C/W Motor

SUMP  PIT  PUMP   :
Merk : EBARA
Type  : 50 DS2,2
Cap.  : 10 m3/ h                   
Head : 20 m
Power : 2,2 KW/ 3 HP/ 380 V/ 50 HZ/ 2900 Rpm

SUBMERSIBLE  PUMP :
Merk                : EBARA
Type                : 50 DSA 5.75 ( AUTOMATIC )
Cap.                 : 150 Ltr/ Mnt
Head               : 10 M
Power              : 0,75 KW/ 3 Phase/ 380 V/ 50 HZ       
C/W Motor

SUBMERSIBLE  PUMP :
Merk                : EBARA
Type                : 50 DS 52.2
Cap.                 : 0,3 M3/ Mnt
Head               : 15 M
Power              : 2,2 KW/ 3 HP/ 50 HZ/ 3 PHASE/ 380 V                     
C/W Motor

SUBMERSIBLE  PUMP :
Merk                : EBARA
Type                : 80 DS 52.2
Power              : 2,2 KW/ 50 HZ/ 380 V/ 3 PHASE

SUBMERSIBLE  PUMP  :
Merk                : EBARA
Type                : 50 DS 51.5
Power              : 1,5 KW/ 380 V/ 415 V/ 3 Phase/ 50 HZ           
C/W Motor

SUBMERSIBLE  PUMP  :
Merk             : EBARA
Type            : 50 DSA 53.7
Cap.             : 300 Ltr/ Mnt
Head            : 30 M
Power           : 3,7 KW/ 5 HP/ 380 V/ 3 Pphase/ 50 Hz C/W Motor

>>>>DOWNLOAD KATALOG DS / DSA / DSJ<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

SELF PRIMING PUMP EBARA

SELF PRIMING PUMP Model :
150SQPB = 6 inc
100SQPB = 4 inc
80SQPB = 3 inc
50SQPB = 2 inc

SELF  PRIMING  PUMP  :

Merk             : EBARA
Type            : 50 SQPB
Power           : 5 KW/ 5,5 HP/ 380 V/ 3 Phase/ 50 HZ/ 2950 RPM       

SELF  PRIMING  PUMP ( AIR LAUT ) : 
Merk                : EBARA
Type                : 50 SQPB
Cap.                 : 24 M3/ Hr
Head               : 15 M
Material           : Bronze
Power              : 3,7 KW/ 5 HP/ 380 V/ 3 Phase/ 50 HZ/ 2950 RPM            
C/W Motor, Coupling, Base Plate

SELF  PRIMING  PUMP ( HIDROFOR AIR LAUT ) : 
Merk                : EBARA
Type                : 50 SQPB
Cap.                 : 20 M3/ Hr
Head               : 20 M
Impeller           : Bronze
Power              : 2,2 KW/ 3 HP/ 380 V/ 3 Phase/ 50 HZ/ 2950 RPM               
C/W Motor, Coupling, Base Plate

SELF PRIMING PUMP ( HIDROFOR AIR TAWAR ) :
Merk                : EBARA
Type                : 50 SQPB
Cap.                 : 10 M3/ Hr
Head               : 20 M
Material           : Cast Iron
Power              : 2,2 KW/ 3 HP/ 380 V/ 3 Phase/ 50 HZ/ 2950 RPM              
 C/W Motor, Coupling, Base Plate

SELF  PRIMING  PUMP   :

Merk             : EBARA
Type            : 80 SQPB
Material         : Cast Iron    
 ( Bare Pump Only ) 

SELF  PRIMING  PUMP :

Merk             : EBARA
Type            : 80 SQPB
Cap.             : 0,85 M3/ Mnt
Head            : 10 M
Power           : 3,7 KW/ 5 HP/ 380 V/ 3 PHASE/ 50 HZ/ 4 POLE/ 1450 RPM
C/W Motor, Coupling, Base Plate

SELF  PRIMING  PUMP :

Merk             : EBARA
Type            : 80 SQPB
Cap              : 20 M3/ Hr
Head            : 20 M
Material         : Bronze
Power           : 5,5 KW/ 7,5 HP/ 380 V/ 50 HZ/ 2950 Rpm

SELF  PRIMING  PUMP        :

Merk             : EBARA
Type            : 150 SQPB
In/ Outlet      : 6”
Power           : Engine 15 HP/ 380 V/ 3 Phase/ 50 Hz C/W ENGINE YANMAR Type TF 150 R    

SELF  PRIMING  PUMP C/W DIESEL ENGINE
Merk             : EBARA
Type            : 100 SQPB
In/ Outlet      : 4”
Power           : Engine 10,5 HP/ 380 V/ 3 Phase/ 50 Hz C/W ENGINE YANMAR Type TF 105 R

SELF PRIMING  PUMP :
Merk  : EBARA
Type  : 100 SQPB
Mat. shaft  : Stainless Steel
Impeller  : Bronze
Power : 5 HP/ 380 V / 50 Hz / 4 Pole / 1500 Rpm
Ampere  : 8.41 A
Insuration type: F
 C/W Motor TECO, pondasi material besi

SELF  PRIMING  PUMP :
Merk : EBARA
Type  : 100 SQPB
Casing   : bronze
Shaft  : stainless steel
Impeller : Semi Open
Power : Teco 3.7kw / 5 hp
 C/W Motor, Pully, Base Plate, and Space Heater

SELF  PRIMING  PUMP      :
Merk                : EBARA
Type                : SQPB 100
Casing             : Cast Iron
Impeller           : Bronze
 ( Bare Pump Only )

SELF  PRIMING  PUMP        :

Merk             : EBARA
Type            : 100 SQPB
Cap.             : 30 M3/ Hr
Head            : 25 M
Power           : 11 KW/ 15 HP/ 380 V/ 3 Phase/ 50 Hz/ 2950 Rpm
C/W Motor, Coupling, Base Plate 

>>>>DOWNLOAD KATALOG SQPB<<<<
>>>>DOWNLOAD KATALOG SQPB SEA WATER<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

POMPA EBARA CDX

EBARA CDXM / CDX SERIES

Single impeller centrifugal pumps with hydraulic components manufactured from stainless steel AISI 304, suitable for pressure boosting, water supply, treatment & irrigation. Air conditioning systems and general water pumping including moderately aggressive liquids.

CENTRIFUGAL  PUMP :
Merk                : EBARA
Type                : CDX 200/ 40
Cap.                 : 2X100 LPM
Head               : 50 M
Power              : 3 KW/ 4 HP/ 380 V/ 50 HZ/ 2950 RPM


PACKAGE  BOOSTER  PUMP : 
Merk             : EBARA
Type            : CDX 90/ 10
Cap.             : 2X50 LPM
Head            : 20 M
Power           : 0,75 KW/ 1 HP/ 380 V/ 50 HZ/ 2950 RPM 
C/W Motor, Coupling, Base Plate, Pressure Tank, Valve, Mechanical Seal, Panel Control, Header & accesories

PACKAGE  BOOSTER  PUMP :

Merk             : EBARA
Type            : CDX 90/ 10
Cap.             : 2X75 LPM
Head            : 8 M

Power           : 0,75 KW/ 1 HP/ 380 V/ 50 HZ/ 2950 RPM C/W Motor, Coupling, Base Plate, Pressure Tank, Valve, Mechanical Seal, Panel Control, Header & accesories

>>>>DOWNLOAD KATALOG EBARA CDX<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Vertical Centrifugal Chemical pumps

Vertical Centrifugal Chemical pumps

Thermoplastic vertical centrifugal chemical pumps conceived for industrial applications, production lines and ecological facilities where resistance to chemical aggression must be coupled with reliability and easy maintenance.
Their particular construction pumps eliminates the possibility of any contact between metal parts and the liquids, while the selection of materials and manufacturing technologies guarantees compatibility with the products handled a long operating life and conformity with the standards in force. The adoption of pumps with these characteristics eliminates, even in case of breaks, hazardous leaks and the need for openings on the bottom of the basins or tanks, allowing the absolutely safe pumping of chemical substances.

Click on the images for further technical details

General characteristics

• Materials of construction: PP, PVC, PVDF, PE-HD.
• Flow rates up to 150 m?/h, heads up to 60 m w.c.
• Hydraulic and structural parts obtained by molding with thermoplastic materials.
• Sliding parts flushed by the liquid being pumped.
• High-efficiency electrical motors compliant with international standards. Provided according to customer and plant requirements.

 
Key

1. PP, PVC PVDF coated bolts and nuts.
2. EPDM or FPM gaskets.
3. Wear bushings directly flushed, in filled PTFE, ceramic or SiC.
4. Cantilever shaft, without intermediate bearings and coated with PP, PVC, PVDF.
5. Pump casing, cover, impeller and other components molded and drawn from corrosion-resistant thermoplastic materials.

AS vertical centrifugal pumps Technical data

Model	Q max	H max	kW	Shaft bearing	Length mm
	m³/h	m w.c.			Min	Max
AS20	5	8	0.25	yes	250	1000
AS30	12	14	0.55 – 1.1	yes	320	3000
AS40	18	18	1.5	yes	320	3000
AS50	35	28	2.2 – 3	yes	465	3000
AS70	50	25	4	yes	1000	3000
AS80	60	35	5.5 – 9.2	yes	1000	3000
AS100	85	45	11	yes	1000	3000

Additional information on the AS vertical centrifugal chemical pumps.

BS vertical centrifugal pumps Technical data 

Model	Q max	H max	kW	Shaft bearing	Standard length mm
	m³/h	m w.c.
BS20	4.5	6	0.25	no	400
BS30	10	14	0.55 – 1.1	no	550
BS40	15	18	1.5	no	550
BS50	24	18	2.2 – 3	no	700
BS70	38	25	5.5	no	900
BS80	47	28	7.5	no	900

Additional information on the BS vertical centrifugal chemical pumps.

GP vertical centrifugal pumps Technical data

Model	Q max	H max	kW	Shaft bearing	Length mm
	m³/h	m w.c.			Min	Max
GP80A	105	35	15	yes	800	3000
GP80B	120	45	18.5	yes	800	3000
GP100D	125	16	9.2	yes	800	3000
GP125D	150	24	15	yes	800	3000

Additional information on the GP vertical centrifugal chemical pumps.

IMPORTANT
Plastic pumps do not allow dry operation.

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)