CNP CDL / CDLF - Light Vertical Multistage Pump

CNP CDL/CDLF - Light Vertical Multistage Centrifugal Pump   
CNP Southern Pump
CDL / CDLF Series
Light Vertical Multistage Centrifugal Pump




CDL,CDLF

Vertical multistage stainless steel centrifugal pump

Applications:   
Cooling water system   
Municipal water supply and boosting 
Domestic water supply   
Irrigation    
General industrial services  
Washing plants   
Boiler feed and condensate system  
Water treatment   

Performance range:   
Capacity:     Q up to 240m3/h  
Head:         H up to 305m  
Temperature:  T up to 120℃
Speed:        n 2900rpm or 3500rpm        
Power:        P up to 110kw  

Standard material:  
All the parts contact with liquid made of 304 stainless steel, 316 stainless steel on request. The pump head and suction & discharge can be made of cast iron on request too.

Description :  
Close coupled vertical multistage pump with stainless steel parts which be driven by a standard TEFC motor, discharge and suction in the same line.
Single phase motor up to 2.2kw, Class F and IP55 are standard.
Standard supply for liquid temperature up to 70℃, high temperature pump are available on request.
Mechanical seal is Tungsten Carbide/Graphite, other material is available on request

Specification and Application
CDL/CDLF is a kind of vertical non-self priming multistage centrifugal pump,which is driven by a standard electric motor.The motor output shaft directly connects with the pump shaft through a coupling.The pressure-resistant cylinder and flow passage components are fixed between pump head and in-and outlet section with tie-bar bolts.The inlet and outlet are located at the pump bottom at the same plane.This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running,out-of-phase and overload.

Application
CDL/CDLF is a kind of multifunctional products.It can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure.CDL type is applicable to conveying non-corrosive liquid,While CDLF is suitable for slightly corrosive liquid.
- Water supply:Water filter and transport in Waterworks,boosting of main pipeline,boosting in high-rise buildings.
- Industrial boosting:Process flow water system,cleaning system,high-pressure washing system,fire fighting system
- Industrial liquid conveying:Cooling and air-conditioning system,boiler water supply and condensing system,machine-associated purpose,acids and alkali
- Water treatment:Ultrafiltration system, reverse osmosis system,distillation system,swimming pool,separator
- Irrigation:Farmland irrigation,spray irrigation,dripping irrigation
 
     Flow rated
     0.4 ~ 180 m3/h
    
     Total Head
     Max. 305 m
    
     Liquid Temperature
     -15oC ~ +120oC
    

Type	Rated Flow	Max Pressure
	[m3/h]	[bar]
CDL 1	1	21
CDL 2	2	23
CDL 3	3	22
CDL 4	4	21
CDL 8	8	21
CDL 12	12	22
CDL 16	16	22
CDL 20	20	23
CDL 32	32	26
CDL 42	42	30
CDL 65	65	22
CDL 85	85	17
CDL 120	120	16
CDL 150	150	16

>>>>DOWNLOAD KATALOG CNP CDL / CDLF<<<<<




Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi LB / LBA Submersible Pumps Single Phase Pumps

Pompa Tsurumi Submersible Pumps Single Phase PumpsType LB Series
LB Series
Top discharge provides maximum motor cooling while allowing continuous duty operation.

Available in single-phase or three-phase. Pumps fit into 8-inch pipes.

LB Series Features
LB(T)-1500:

High chrome semi-open impeller resists wear for adhesive particles.

Diode motor protectors prevent stator damage in high amperage or run-dry situations.

Up to 70′ shut off head

Slimline design allows pumps to fit into 8″ pipes.

LB Series Features

LB-800:

Designed to fit an 8″ pipe.

Up to 60′ shut off head.

Available in 110V and 220V single-phase with 50 foot cables.

Double Inside Mechanical Seal With SiC faces provides the longest operational life.

Oil Lifter provides lubrication of the
seal faces.

OPTIONAL ACCESSORIES
Float Switch for automatic operation
TS-302 for 110V, TS-303 for 220V.

LB Series Features
LB-480:
Urethane Semi Vortex Impeller and elastomer lined pump casing for maximum wear life.

OPTIONAL ACCESSORIES
TS-301 Float Switch for
automatic operation.

LB Series Features
LB-480A:
Our advanced EL-1 Relay unit mounted on the side of the pump, eliminates the need for float switches. These sensitive electrodes detect water, turning the pump on and off automatically.

LB Series Features
LBT-800:
Three-phase pumps complete with double mechanical SIC seals, oil lifters, and durable lightweight materials found in our similar single-phase products. Available in 230 or 460 voltages.

LB-A Portable Dewatering Pumps (Automatic)
Portable Dewatering Pumps
(Automatic)
Discharge Bore(mm) 50 (80)
Motor Output(kW) 0.48 ･ 0.75
The LB-A-series is a submersible single-phase automatic portable drainage pump. An innovative electrode type relay unit attached to the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption and extends operating life. Though the pump is a single-phase unit, it has the durability equivalent to three-phase drainage pumps, since the wear parts are made of abrasion-resistant materials. The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. The slim design allows the pump to be placed in a confined space. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.

LB Portable Dewatering Pumps
Portable Dewatering Pumps
Discharge Bore(mm) 50 (80)
Motor Output(kW) 0.48 – 1.5
The LB-series is a submersible single-phase portable drainage pump. Though it is a single-phase unit, the pump has the durability equivalent to three-phase drainage pumps, since the wear parts are made of abrasion-resistant materials. The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. Every LB model is slim design enough to be accommodated in an 8-inch pipe. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.*
* Except for LB-1500

>>>>DOWNLOAD KATALOG TSURUMI LB / LBA<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi NK / NKZ Submersible Pumps Single Phase Pumps

Pompa Tsurumi Submersible Pumps Single Phase PumpsType NK Series
NK Series
Heavy duty, high head single-phase pumps available in 110v or 220v. Optional agitator kits allow continuous duty when pumping abrasive materials.

NK Series Features
Synthetic Rubber Wear Parts for maximum durability and pump performance.

Continuous duty air-filled motor

Ductible iron semi-vortex impeller

Dual voltage available on NK2-15 model

OPTIONAL ACCESSORIES
TS-303 Float Switch for
automatic operation (220V only).

Agitator kit to suspend solids and
prevent clogging.

2-inch NPT coupling available.

NK Series Features
NK3-22L Features:

New high volume NK3-22L series pump produces 35% more volume than our standard NK3-22 series. Available in 220v single-phase only.

Performance Range

Model	Discharge Size (in.)	Motor Output (HP)	Voltage (V)	Cable Length (ft.)	Diameter (in.)	Height (in.)	Weight (lbs.)
NK2-15	3	2	110 or 220	32	9 7/16	24 1/2	63.5
NK3-22	3	3	220	32	9 7/16	24 1/2	64
NK3-22L	3	3	220	32	9 1/4	26 1/2	88

Slurry Pumps model NKZ

Slurry Pumps

Discharge Bore(mm) 80 – 150

Motor Output(kW) 2.2 – 11

The NKZ-series is a submersible three-phase cast iron heavy-duty slurry pump driven by a 4-pole motor. It is equipped with an agitator that assists smooth suction of settled matters. The side discharge, spiral design allows smoother passage of the sucked solid matters. The motor is cooled by a water jacket that assures efficient motor cooling even when it operates with its motor exposed to air. The use of guide rail fitting system improves convenience in the facilities such as, iron works, ready-mixed concrete plants, and wastewater treatment plants where the pump is to be installed with a fixed discharge piping.

>>>>DOWNLOAD KATALOG TSURUMI NK<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi KTV / KTVE Submersible Pumps Three Phase Pumps

Pompa Tsurumi Submersible Pumps Three Phase Pumps Type KTV Series
KTV Series
KTV and KTVE pumps are wear resistant and designed for those light to medium-duty applications. Our KTVE series incorporates a level sensor eliminating the need for auto control panels and externally mounted float assemblies.

KTV Series Features
Discharge sizes from 2-3 inches and horsepower ranges from 1-7.5 hp.

Lightweight and compact.

Durable construction provides low maintenance and easy repair.

Internal thermal motor protection, dual silicon carbide mechanical seals.

Tsurumi’s exclusive oil lifter.

Performance Range

Model	Discharge Size (in.)	Motor Output (HP)	Pole	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
KTV2-15	2	2	2-3600	208/230/460/575	9 7/16	15 9/16	43
KTV2-22	2	3	2-3600	208/230/460/575	9 7/16	16 3/8	51
KTV2-37H	2	5	2-3600	208/230/460/575	11 1/4	20 1/16	77
KTV2-37H	3	5	2-3600	208/230/460/575	11 1/4	20 1/16	77
KTV2-55	3	7.5	2-3600	208/230/460/575	11 13/16	21 7/16	102
KTV2-8	2	1	2-3600	208/230/460/575	7 7/8	14 1/2	25
KTVE2.75	2	1	2-3600	208/230/460/575	7 7/8	16 7/16	28
KTVE21.5	2	2	2-3600	208/230/460/575	9 7/16	16 3/4	48
KTVE22.2	2	3	2-3600	208/230/460/575	9 7/16	16 3/4	55
KTVE33.7	3	5	2-3600	208/230/460/575	11 1/4	23 1/16	87

KTVE Dewatering Pumps (Automatic)

Dewatering Pumps

(Automatic)

Discharge Bore(mm) 50 ･ 80 (100)

Motor Output(kW) 0.75 – 5.5

The KTVE-series is a submersible three-phase automatic portable drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption and extends operating life. Though the pump is a three-phase unit, it is designed to weigh lighter for portability, yet it can be used for pumping liquid found in ordinary construction and foundation works. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space.

>>>>>DOWNLOAD KATALOG TSURUMI KTV/KTVE<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi HSD Portable Slurry Pumps

Slurry Pumps HSD Motor Output(kW) 0.55
Slurry Pumps
Discharge Bore(mm) 50
Motor Output(kW) 0.55
The HSD pump is a submersible single-phase portable slurry pump. It is equipped with a high-chromium cast iron agitator that assists smooth suction of the settled matters. Though the pump is a single-phase unit, it has the durability equivalent to three-phase slurry pumps, since the wear parts are made of abrasion-resistant materials.

HSD2.55S:

Complete special 2 years warranty.

Anti-wicking block prevents water incursion.

Built-in shaft mounted agitator suspends solids.

High Chromium Iron impeller.

Ductile Iron Casing.

3/4 HP motor

>>>>DOWNLOAD KATALOG TSURUMI HSD<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi HS / HSZ / HSR Single Phase Portable Dewatering Pumps

HS Portable Dewatering Pumps
Portable Dewatering Pumps
Discharge Bore(mm) 50 ･ 80
Motor Output(kW) 0.4 ･ 0.75
The HS-series is a submersible single-phase portable drainage pump. Though it is a single-phase unit, the pump has the durability equivalent to three-phase drainage pumps, since the wear parts are made of abrasion-resistant materials. The side discharge, spiral design allows smoother passage of the sucked solid matters. The shaft-mounted agitator prevents “Air Lock” that tends to take place on vortex or semi-vortex pumps.

HSZ Portable Dewatering Pumps (Automatic)
Portable Dewatering Pumps
(Automatic)
Discharge Bore(mm) 50 ･ 80
Motor Output(kW) 0.4 ･ 0.75
The HSZ-series is a submersible single-phase automatic portable drainage pump. The automatic operation, controlled by a single float switch, reduces consumption and extends operating life. Though the pump is a single-phase unit, it has the durability equivalent to three-phase drainage pumps, since the wear parts are made of abrasion-resistant materials. The side discharge, spiral design allows smoother passage of the sucked solid matters. The shaft-mounted agitator prevents “Air Lock” that tends to take place on vortex or semi-vortex pumps.

Portable Residue Dewatering Pumps HSR
Portable Residue Dewatering Pumps
Discharge Bore(mm) 50
Motor Output(kW) 0.4
The HSR pump is a submersible single-phase portable residue drainage pump. It can start pumping if there is water with its level of 5mm or more and can continue pumping the water level goes down to 1mm. The rubber lined base plate protects the floor surface from scratching. Though the pump is a single-phase unit, it has the durability equivalent to three-phase drainage pumps as the wear parts are made of abrasion-resistant materials. The pump adopts the side dischange, spiral design. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.

>>>>DOWNLOAD KATALOG TSURUMI HS / HSZ<<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi KRS / KRSU Series Submersible Pumps Three Phase Pumps

Product Description
The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications. Available in a variety of discharge sizes and horsepower, the KRS pumps are engineered to withstand even the most rigorous situations.

Discharge sizes from 3-14 inches and horsepower ranges from 3-50 hp.
4 pole, 1800 rpm motors reduce impeller tip speed and extend parts wear life.
Rugged cast iron construction holds up to the most aggressive mining, aggregate, construction applications.
Dual Silicon Carbide Mechanical seals in a separate oil bath.

Product Specification
Category: Pump
Brand: Tsurumi
Power: 3~22KW
Speed: 1500 RPM
Voltage: 380/660V
Frequency: 50Hz
Capacity: 1500-5000 L/Min
Head: 5-20 Meter
Liquid Temperature: 0-40°C

Tsurumi Submersible Pumps Three Phase Pumps Type KRS Series
KRS Series
The cast iron construction of our KRS series extends pump life by preventing premature wear and failure from the abrasive materials found in mining, aggregate, and construction applications. Available in a variety of discharge sizes and horsepower, the KRS pumps are engineered to withstand even the most rigorous situations.

KRS Series Features
Discharge sizes from 3-14 inches and horsepower ranges from 3-50 hp.

4 pole, 1800 rpm motors reduce impeller tip speed and extend parts wear life.

Rugged cast iron construction holds up to the most aggressive mining, aggregate, construction applications.

Dual Silicon Carbide Mechanical seals in a separate oil bath.

Performance Range

Model	Discharge Size (in.)	Motor Output (HP)	Pole	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
KRS1022	10	30	4-1800	208/230/460/575	20 1/2	49 15/16	990
KRS1230	12	40	4-1800	208/230/460/575	26 3/8	55 1/4	1540
KRS1437	14	50	4-1800	208/230/460/575	26 3/8	55 1/4	1650
KRS2-8S	8	15	4-1800	208/230/460/575	18 9/16	32 1/16	383
KRS2-A3	3	3	4-1800	208/230/460/575	13 3/8	23 5/8	159
KRS2-A4	4	5	4-1800	208/230/460/575	13 3/4	26 15/16	194
KRS2-A6	6	10	4-1800	208/230/460/575	16 5/16	26 15/16	286
KRS2-B3	3	5	4-1800	208/230/460/575	13 3/4	26 15/16	196
KRS2-B4	4	7.5	4-1800	208/230/460/575	13 3/4	26 9/16	209
KRS2-B6	6	15	4-1800	208/230/460/575	16 5/16	29 3/16	330
KRS815	8	20	4-1800	208/230/460/575	18 15/16	37 3/8	520
KRS819	8	25	4-1800	208/230/460/575	22 1/2	45 1/2	850
KRS822	8	30	4-1800	208/230/460/575	22 1/2	45 1/2	860
KRS822L	8	30	4-1800	208/230/460/575	22 1/2	45 1/2	860

Pump for Sewage Bypass Model KRSU

Pump for Sewage Bypass

Discharge Bore(mm) 200

Motor Output(kW) 22

The KRSU822 pump of submersible three-phase cast iron heavy-duty pump is designed and built specifically for temporarily bypassing drainage in sewer construction work. With a maximum head of 26.5 m, maximum capacity of 5.7 m3/min, and space-saving design of 546 mm in diameter, this pump plays an active role in drainage in the deep confined space of a manhole.

Also, with its semi-vortex structure, this pump provides a large solids passage of 56 mm in diameter, which prevents any clogging of foreign matter. The top discharge, side flow design assures efficient motor cooling even when operating with the motor exposed to air.

KRS Dewatering Pumps

Dewatering Pumps

Discharge Bore(mm) 80 – 250

Motor Output(kW) 2.2 – 22

The KRS-series is a submersible three-phase cast iron high volume heavy-duty drainage pump driven by a 4-pole motor. The cast iron body, combined with the low speed motor, presents extra durability for use in the most demanding conditions. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air.*

* Model KRS1022 is a top discharge, flow-thru design. The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability.

>>>>>DOWNLOAD KATALOG TSURUMI KRS<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi C Series Cutter Impeller Submersible Pumps Sewage and Wastewater Pumps

Product Description
A serrated suction cover is used in combination with a tungsten carbide tip impeller ensuring that fibrous foreign matter is cut up, and sewage is transferred without clogging.

Single and multi-vane cast iron impellers with tungsten carbide tips
Serrated suction cover is field replaceable/adjustable
Built-in thermal protector prevents motor failure due to overloading or accidental run-dry conditions.
Handles residential, commercial, and indiustrial sewage
Ideal for poultry, dairy. hog, and fish waste processing
Suitable for problem sump applications with unpredictable solids incursion found in schools, hospitals, industrial laundries
High head capabilities available on certain models

Product Specification
Category: Pump
Brand: Tsurumi
Power: 0.75~11KW
Speed: 1500~2900 RPM
Frequency: 50Hz
Capacity: 400-2600 L/Min
Head: 5-25M
Liquid Temperature: 0-40°

Pompa Tsurumi Submersible Pumps Sewage and Wastewater Pumps model C Series
C Series
A serrated suction cover is used in combination with a tungsten carbide tip impeller ensuring that fibrous foreign matter is cut up, and sewage is transferred without clogging.

C Series Features
Single and multi-vane cast iron impellers with tungsten carbide tips

Serrated suction cover is field replaceable/adjustable

Built-in thermal protector prevents motor failure due to overloading or accidental run-dry conditions.

Handles residential, commercial, and indiustrial sewage

Ideal for poultry, dairy. hog, and fish waste processing

Suitable for problem sump applications with unpredictable solids incursion found in schools, hospitals, industrial laundries

High head capabilities available on certain models

Performance Range

Series	Model	Discharge Size (in.)	Motor Output (HP)	Voltage (V)	Diameter (in.)	Height (in.)	Weight – Freestanding (lbs.)	Weight – TOS Model (lbs.)
C HighHead	80C211	3	15	230/460/575	13 9/16	36 1/2	326	313
C HighHead	80C22.2	3	3	230/460/575	10 1/4	24 1/16	139	130
C HighHead	80C23.7	3	5	230/460/575	10 1/4	24 1/16	141	132
C HighHead	80C25.5	3	7.5	230/460/575	13 9/16	34 5/8	278	265
C HighHead	80C27.5	3	10	230/460/575	13 9/16	34 5/8	284	271
C Series	100C411	4	15	230/460/575	17 3/16	39 3/8	406	390
C Series	100C415	4	20	230/460/575	17 3/16	24 5/8	706	690
C Series	100C42.2	4	3	230/460/575	12 3/4	24 1/4	154	141
C Series	100C43.7	4	5	230/460/575	13 1/8	27 3/16	183	170
C Series	100C45.5	4	7.5	230/460/575	16 1/8	35 3/4	309	293
C Series	100C47.5	4	10	230/460/575	16 1/8	36 9/16	349	334
C Series	50C2.75	2	1	230/460/575	9 13/16	16 5/16	53	51
C Series	50C2.75S	2	1	115/230	9 13/16	20 9/16	70	66
C Series	80C21.5	3	2	230/460/575	9 13/16	21 1/8	79	75
C Series	80C41.5	3	2	230/460/575	12 7/16	23	119	115

>>>>DOWNLOAD KATALOG TSURUMI C SERIES<<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)

Pompa Tsurumi KTZ / KTZE / KTD Submersible Pumps Three Phase Portables

Product Description
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear plate. Discharge sizes from 2-6 inches and horsepower range from 2-15 hp. Utilizes 2-pole, 3600 rpm motors to achieve higher heads. High pressure rated mechanical seals are isolated to provide superior motor protection. Rugged cast iron construction. Pressure relief ports and exclusive oil lifter extend mechanical seal life, eliminating premature wear and failure in high head operations. Internal thermal motor protection. Anti-wicking cable entrance.

Product Specification
Category: Pump
Brand: Tsurumi
Power: 100-600 L/Min
Head: 40-160 Meter
Liquid Temperature: 0-40°C
Diameter: 50, 80, 100, 150

Pompa Tsurumi Submersible Pumps Three Phase Portables Type KTZ Series
KTZ Series
KTZ pumps are designed to withstand the most demanding conditions, including those found in the highly abrasive waters of construction, aggregate, and mining dewatering. Versatility is increased as each pump model has the capability of easily converting between high head and high volume performance with a simple change of the impeller and wear plate.

KTZ Series Features
Discharge sizes from 2-6 inches and horsepower range from 2-15 hp.

Utilizes 2-pole, 3600 rpm motors to achieve higher heads.

High pressure rated mechanical seals are isolated to provide superior motor protection.

Rugged cast iron construction.

Pressure relief ports and exclusive oil lifter extend mechanical seal life, eliminating premature wear and failure in high head operations.

Internal thermal motor protection.

Anti-wicking cable entrance.

Performance Range

Model	Discharge Bore (in.)	Motor Output (HP)	Shipping Weight (lbs.)	Cable Length (ft.)	Diameter (in.)	Height (in.)
KTZ21.5-60	2	2	64	50	9 1/4	21 9/16
KTZ22.2-60	2	3	70	50	9 1/4	22 3/8
KTZ23.7-60	2	5	121	50	11 1/8	24 5/8
KTZ32.2-60	3	3	70	50	9 1/4	22 3/8
KTZ33.7-60	3	5	121	50	11 1/8	24 5/8
KTZ35.5-60	3	7.5	145	50	12 1/16	25 11/16
KTZ411-60	4	15	286	50	14 11/16	28 11/16
KTZ43.7-60	4	5	121	50	11 1/8	24 5/8
KTZ45.5-60	4	7.5	145	50	12 1/16	25 11/16
KTZ47.5-60	4	10	205	50	13	26
KTZ611-60	4/6	15	286	50	14 11/16	28 11/16
KTZ67.5-60	4/6	10	205	50	13	26

KTZE Dewatering Pumps (Automatic)

Dewatering Pumps

(Automatic)

Discharge Bore(mm) 50 – 100

Motor Output(kW) 1.5 – 3.7

The KTZE-series is a submersible three-phase automatic cast iron high head heavy-duty drainage pump. An innovative electrode type relay unit built into the pump automatically starts and stops the pump to eliminate dry-running. This mechanism greatly reduces power consumption and extends operating life. The cast iron body with high-chromium cast iron impeller enables it to withstand demanding conditions found in construction, aggregate and mining applications. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose.

KTZ Dewatering Pumps

Dewatering Pumps

Discharge Bore(mm) 50 – 150

Motor Output(kW) 1.5 – 11

The KTZ-series is a submersible three-phase cast iron high head heavy-duty drainage pump. The cast iron body with high-chromium cast iron impeller enables it to withstand demanding conditions found in construction, aggregate and mining applications. The top discharge, side flow design assures efficient motor cooling even when it operates with its motor exposed to air. The slim design allows the pump to be placed in a confined space. The discharge direction is selectable between vertical and inclined, which prevents folding or bending of the discharge hose. The pump with 7.5 or 11kW motor incorporates seal pressure relief ports that prevent the pumping pressure from applying to the shaft seal.

REGISTRATION OF DESIGN

Tsurumi KTZ-series has been registered of the design around the world (including the EU, the U.S. and China).

The right on the design shall be granted under the law of each country.

Pompa Tsurumi Submersible Pumps Three Phase Pumps Type KTD Series

KTD Series

Tsurumi Agitator Pump KTD Series is a cast iron made, heavy-duty slurry pump employing the KTZ Series as the base. An agitator is provided to assist smooth suction of the pumping fluid. The side-flow, top-discharge design keeps the motor cooling even if the pump is operated continuously with its motor exposed in air, and it makes the pump easier to place in a confined space.

KTD Series Features

Discharge sizes from 2-3 inches and horsepower ranges from 2.7-4 hp.

2 pole, 3600 rpm motors.

Rugged cast iron construction.

Dual silicon carbide mechanical seals.

Internal Thermal motor protection and Tsurumi’s exclusive oil lifter.

Anti wicking cable entrance.

Suitable for transferring or draining bentonite slurry used for slurry drilling, draining slurry mixed water in civil engineering works or foundation works.

Performance Range

Model	Discharge Size (in.)	Motor Output (HP)	Pole	Voltage (V)	Diameter (in.)	Height (in.)	Weight (lbs.)
KTD22.0	2	2.7	2-3600	208/230/460/575	9 1/4	23 3/16	86
KTD33.0	3	4	2-3600	208/230/460/575	11 11/16	25 3/4	145

>>>>DOWNLOAD KATALOG TSURUMI KTZ<<<<

Untuk informasi lebih lanjut bisa menghubungi kami di:

HP / WA : 089503466660

Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)