Product Description
Discharge sizes from 2-4 inches and horsepower range from 4-40 hp Replaceable and adjustable high chrome wear rings provide increased wear resistance. Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions. High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet. Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications. Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.
Product Specification
Category: Pump
Brand: Tsurumi
Capacity: 1000-5000 L/Min
Head: 20-90 Meter
Liquid Temperature: 0-40°C
Diameter: 100, 150, 200mm
LH/LHW Series
Rental and supply companies preferred choice for contractor ready slimline pumps.
LH/LHW Series Features
Discharge sizes from 2-4 inches and horsepower range from 4-40 hp
Replaceable and adjustable high chrome wear rings provide increased wear resistance.
Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.
High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.
Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.
Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.
Performance Range
| Model | Discharge Bore (in.) | Motor Output (HP) | Shipping Weight (lbs.) | Cable Length (ft.) | Voltage (V) | Weight (lbs.) | Diameter (in.) | Height (in.) |
|---|---|---|---|---|---|---|---|---|
| LH23.0W | 2 | 4 | Consult Factory | 50 | 208-230/460/575 | 101 | 7-5/16 | 24-13/16 |
| LH33.0 | 3 | 4 | Consult Factory | 50 | 208-230/460/575 | 93 | 7-5/16 | 25-3/8 |
Pompa Tsurumi Submersible Pumps Three Phase Pumps Type LH Series
LH Series
Tsurumi’s LH Series handles medium to high flows at higher heads, yet its top discharge flow-through design welcomes low water level operation for extended periods. Complete with a high chromium semi-open impeller and adjustable wear rings, our LH pumps provide you with increased wear resistance whether your application is effluent transfer, construction site drainage, or commercial/industrial dewatering.
LH Series Features
Discharge sizes from 4-8 inches and horsepower range from 20-150 hp
Replaceable and adjustable high chrome wear rings provide increased wear resistance.
Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.
High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.
Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.
Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.
Performance Range
| Model | Discharge Bore (in.) | Motor Output (HP) | Shipping Weight (lbs.) | Cable Length (ft.) | Voltage (V) | Weight (lbs.) | Diameter (in.) | Height (in.) |
|---|---|---|---|---|---|---|---|---|
| LH422 | 4 | 30 | N/A | 50 | 208/230/460/575 | 680 | 16-9/16 | 51-3/4 |
| LH430 | 4 | 40 | N/A | 50 | 208/230/460/575 | 730 | 16-9/16 | 53-3/8 |
| LH6110 | 6 | 150 | N/A | 50 | 460/575 | 2640 | 23-5/16 | 70-3/8 |
| LH615 | 6 | 20 | N/A | 50 | 208/230/460/575 | 420 | 13-7/16 | 39 |
| LH619 | 6 | 25 | N/A | 50 | 208/230/460/575 | 610 | 16-9/16 | 52-1/4 |
| LH622 | 6 | 30 | N/A | 50 | 208/230/460/575 | 640 | 16-9/16 | 53-5/8 |
| LH637 | 6 | 50 | N/A | 50 | 208/230/460/575 | 1090 | 20-7/8 | 57 |
| LH645 | 6 | 60 | N/A | 50 | 460/575 | 1120 | 20-7/8 | 57 |
| LH675 | 6 | 100 | N/A | 50 | 460/575 | 1870 | 21-5/8 | 66 |
| LH690 | 6 | 120 | N/A | 50 | 460/575 | 2420 | 23-13/16 | 70-3/8 |
| LH8110 | 8 | 150 | N/A | 50 | 460/575 | 2750 | 23-5/16 | 70-3/8 |
| LH837 | 8 | 50 | N/A | 50 | 208/230/460/575 | 1090 | 20-7/8 | 58-9/16 |
| LH845 | 8 | 60 | N/A | 50 | 460/575 | 1120 | 20-7/8 | 58-9/16 |
| LH855 | 8 | 75 | N/A | 50 | 460/575 | 1780 | 21-5/8 | 67-9/16 |
| LH875 | 8 | 100 | N/A | 50 | 460/575 | 1870 | 21-5/8 | 67-9/16 |
| LH890 | 8 | 120 | N/A | 50 | 460/575 | 2530 | 23-5/16 | 70-3/8 |
Tsurumi’s LHW series achieves extremely high head capabilities. Our dual staged enclosed impellers are just one of many features found engineered into these durable pumps which can help you solve all your long distance water transfer needs.
LHW Series Features
Discharge sizes from 2-4 inches and horsepower range from 4-40 hp
Replaceable and adjustable high chrome wear rings provide increased wear resistance.
Built in thermal and amperage protectors prevent motor failure in run-dry or surge conditions.
High pressure dual silicon carbide mechanical seals operate in a separate oil chamber and are capable of withstanding operating depths of 328 feet.
Seal pressure relief ports provide a flow path above the pump casing and allow water release from the pump and away from the shaft. This protects the mechanical seals from excessive pumping pressure or water hammer in high head pumping applications.
Anti-wicking cable entrance and Tsurumi’s exclusive oil lifter for added protection.
Performance Range
| Model | Discharge Bore (in.) | Motor Output (HP) | Shipping Weight (lbs.) | Cable Length (ft.) | Voltage (V) | Weight (lbs.) | Diameter (in.) | Height (in.) |
|---|---|---|---|---|---|---|---|---|
| LH23.0W | 2 | 4 | Consult Factory | 50 | 208-230/460/575 | 101 | 7-5/16 | 24-13/16 |
| LH311W | 3 | 15 | N/A | 50 | 208/230/460/575 | 286 | 10-5/8 | 40-5/16 |
| LH322W | 3 | 30 | N/A | 50 | 208/230/460/575 | 670 | 13 | 48-5/8 |
| LH33.0 | 3 | 4 | Consult Factory | 50 | 208-230/460/575 | 93 | 7-5/16 | 25-3/8 |
| LH430W | 4 | 40 | N/A | 50 | 208/230/460/575 | 714 | 14-3/8 | 54-1/8 |
Tandem Operation (LH / LH-W) High-Head Dewatering Pumps
High-Head Dewatering Pumps
Discharge Bore(mm) 50 – 100
Motor Output(kW) 3 – 30
“Tandem operation” is an operation method that connects two pumps of the same model in series. This provides double pump head at the same flow rate in comparison with that of a single pump. The principle of tandem operation is the same as that with multistage pumps. The LH and LH-W series pumps adopt the center flange construction to align the discharge pipe with the cylindrical pump center axis.* Connecting the pumps in series with the tandem connector can provide higher pump head without affecting the advantage of the slim design. At construction sites, there are many cases where a higher pump head is required as construction work progresses.
In such cases, the addition of a tandem pump may meet the required pump head, instead of using a new pump.
* Available as an option for separately purchased LH33.0 and LH23.0W.
LH-W High-Head Dewatering Pumps (Dual Impellers)
High-Head Dewatering Pumps
(Dual Impellers)
Discharge Bore(mm) 50 – 100
Motor Output(kW) 3 – 110
The LH-W-series is a three-phase cast iron extra high head drainage pump having dual impellers. Being the pump cylindrical and slim, it can be installed in a well casing for deep well dewatering. The center flange construction assures a stable installation even if it is fixed by the discharge pipe.*1 The top discharge, flow-thru design provides maximum motor cooling efficiency allowing continuous operation at low water levels and extended dry-run capability. The pump incorporates seal pressure relief ports that prevent the pumping pressure from applying to the shaft seal.*2
*1 excluding LH4110W
*2 excluding LH23.0W
Untuk informasi lebih lanjut bisa menghubungi kami di:
HP / WA : 089503466660
Email : authorizeddistributorpompa@gmail.com (klik kanan untuk copy email address)
